Skip to content

Circuit Sim Lab (電路模擬實驗室) MCP server

ai.enscon/circuit-simenscon.aistreamable-httpv1.0.0Scanned

PCB calculators: trace impedance, crosstalk, diff skew, crystal load cap, Vout tolerance, inrush.

6 tools: 5 change things and 1 only read.

Tools: 0 delete, 0 irreversible, 5 write, 1 read.
  • Reads private data · 0
  • Reads text others write · 0
  • Can send data out · 0
  • No findings

Tools listed without sign-in. Remote posture

With Anlyon

5 tools here change things. Govern them.

  • Anlyon lists the tools and adopts none.
  • Each tool you adopt gets approvals and receipts.
  • Your agent never holds the key.
Govern this server →

A tool your agent calls directly is not routed through Anlyon and is not governed by it. Anlyon Radar only lists and labels, and these labels are the same either way.

What the Circuit Sim Lab (電路模擬實驗室) MCP server can do

The Circuit Sim Lab (電路模擬實驗室) MCP server is published by enscon.ai, a domain the MCP Registry verified. It has 6 tools. It can create or change data (5 tools: impedance, crosstalk, xtal_load_cap, output_voltage_tolerance and 1 more), but cannot delete data. 1 tool only reads.

None of its tools reads private data, brings in text other people write, or sends data out.

None of the fixed checks matched anything in its tool definitions. That is not a safety guarantee.

Its remote endpoint lists its tools without sign-in.

Last scanned Nov 11, 2026, version 1.0.0.

Tools

Grouped by what each tool does, most consequential first. Open one for its reasons and full description; descriptions are the publisher's own words.

6 tools

Changes things 5Claude Code: ask
  • crosstalk兩條耦合線的串音:偶/奇模阻抗用 2D 電場數值解,再算近端串音係數 kb、飽和比例、遠端串音係數。只回傳解析式的部分(不含工具頁的 ngspice 時域波形)。No findings

    Why it is in this group

    • Nothing in its name or description says what it does, so it is counted as a write.
    Description, as the server wrote it
    兩條耦合線的串音:偶/奇模阻抗用 2D 電場數值解,再算近端串音係數 kb、飽和比例、遠端串音係數。只回傳解析式的部分(不含工具頁的 ngspice 時域波形)。
  • impedance用 2D 電場數值解算微帶線或帶狀線的差動阻抗(Zdiff、Zcomm、奇/偶模)或單端阻抗(Z0),含銅厚。回傳附適用範圍。No findings

    Why it is in this group

    • Nothing in its name or description says what it does, so it is counted as a write.
    Description, as the server wrote it
    用 2D 電場數值解算微帶線或帶狀線的差動阻抗(Zdiff、Zcomm、奇/偶模)或單端阻抗(Z0),含銅厚。回傳附適用範圍。
  • inrush_current負載開關控速上升時的充電電流、峰值電流、能量與脈衝 I²t(mode=slew),或電容直接接電源時的串聯 R-L-C 步階電流(mode=direct)。No findings

    Why it is in this group

    • Nothing in its name or description says what it does, so it is counted as a write.
    Description, as the server wrote it
    負載開關控速上升時的充電電流、峰值電流、能量與脈衝 I²t(mode=slew),或電容直接接電源時的串聯 R-L-C 步階電流(mode=direct)。
  • output_voltage_tolerance回授電阻分壓的輸出電壓:最壞情況(每項取上下限的所有組合)、RSS 統計;可選蒙地卡羅超規比例。No findings

    Why it is in this group

    • Nothing in its name or description says what it does, so it is counted as a write.
    Description, as the server wrote it
    回授電阻分壓的輸出電壓:最壞情況(每項取上下限的所有組合)、RSS 統計;可選蒙地卡羅超規比例。
  • xtal_load_cap外掛電容 C1、C2 與雜散電容算出實際負載電容 CL、頻率偏移 ppm、振盪增益餘裕、驅動功率,並給出剛好對上規格 CL 的電容值。No findings

    Why it is in this group

    • Nothing in its name or description says what it does, so it is counted as a write.
    Description, as the server wrote it
    外掛電容 C1、C2 與雜散電容算出實際負載電容 CL、頻率偏移 ppm、振盪增益餘裕、驅動功率,並給出剛好對上規格 CL 的電容值。
Only reads 1Show 1 read-only tool
  • diff_skew兩條線的長度差換成時間差(ps),對照介面的上限:USB3/PCIe 用業界經驗值 5 mil(非規範原文,出處見適用範圍);DisplayPort/HDMI 沒有預設,請用 lim 填晶片廠或規範給的值。No findings

    Why it is in this group

    • The name "diff_skew" says "diff": a word for reading.
    Description, as the server wrote it
    兩條線的長度差換成時間差(ps),對照介面的上限:USB3/PCIe 用業界經驗值 5 mil(非規範原文,出處見適用範圍);DisplayPort/HDMI 沒有預設,請用 lim 填晶片廠或規範給的值。

This is not a safety rating, and no finding is not a safety guarantee. The groups and findings come from fixed checks of the tool definitions the server returned on the date shown, not from its code or what it does when called. How the checks work.

Exfil surface

Which tools read private data, which read text someone else can write, and which can send data out. One of each is a path a prompt injection can use.

No private-data, untrusted-input, outbound path in this server alone: no tool is tagged private-data or untrusted-input or outbound.

Reads private data0
Reads files, mail, messages, databases, secrets, calendars or repositories.
Reads text others write0
Brings in text someone else can write: web pages, inbound email, messages, issues and comments.
Can send data out0
Can carry data to people or systems: it sends, posts or publishes, or takes a recipient, channel or URL.

Other servers in the same agent add their own tools to these paths. Audit your whole setup to see them together.

Remote posture

What anyone on the internet sees at the remote endpoint: an anonymous initialize and tools/list, and the public OAuth metadata.

Tools listed without sign-in

Looked at Nov 20, 2026, 18:25 UTC, unchanged since Oct 22, 2026. No credentials were sent and no tool was called. What is looked at.

Reachable
yes
HTTP status of an anonymous initialize
200
tools/list served without credentials
yes
Tools that change things, listed without credentials
5
Protocol version
2025-06-18
WWW-Authenticate on 401
not observed
resource_metadata in WWW-Authenticate
not observed
RFC 9728 protected resource metadata
not observed
Authorization servers
not observed
Legacy HTTP+SSE transport
no
Dynamic client registration
not observed
Client ID metadata documents
not observed
  • WarnThe whole server

    The endpoint served tools/list without credentials, and the list has 5 tools that change things (5 write). Whether a call also works without credentials was not tested: tools are never called.

    Matched text

    https://circuit-sim.enscon.ai/mcp: tools/list returned 6 tools to an anonymous client, including impedance (write), crosstalk (write), xtal_load_cap (write), output_voltage_tolerance (write), inrush_current (write)

    What this check looks for

Findings

Matches of fixed checks, with the text they matched.

No check matched anything in these tool definitions. That is not a safety guarantee.

History

Changes to its tool definitions and to its remote endpoint, newest first.

No change seen yet. Its tools are rescanned every day, and a remote endpoint is looked at once a week.

Install

Pinned to version 1.0.0. Values in angle brackets are yours to fill in.

claude mcp add --transport http circuit-sim https://circuit-sim.enscon.ai/mcp --header 'Authorization: <your-authorization>'
claude mcp add --transport http circuit-sim https://circuit-sim.enscon.ai/mcp --header 'Authorization: <your-authorization>'

Run in a terminal.

Claude Code permissions

Allow the reads, ask before a change or a way out, deny the deletes. Paste into .claude/settings.json.

.claude/settings.json
{
  "permissions": {
    "allow": [
      "mcp__circuit-sim__diff_skew"
    ],
    "ask": [
      "mcp__circuit-sim__impedance",
      "mcp__circuit-sim__crosstalk",
      "mcp__circuit-sim__xtal_load_cap",
      "mcp__circuit-sim__output_voltage_tolerance",
      "mcp__circuit-sim__inrush_current"
    ],
    "deny": []
  }
}

Tools that only read are allowed, tools that change things ask first, tools that delete or cancel are denied. A read that can send data out (it takes a URL, say) asks first too. It assumes the server is installed as circuit-sim. Review it before you use it.

Pin

Keep the decision: fail CI when the tools change, follow every change, or show a badge.

Pin in CI

Fail a build when the tools you reviewed are not the tools the server serves today.

curl -s "https://radar.anlyon.com/api/v1/servers/ai.enscon/circuit-sim/verify?hash=01d295e8bec63be62b4ca5d1a9607b3e2469e4f9a51fbe3bc8cdb347da560db1" | jq -e '.changed == false'

Pinned hash 01d295e8bec6, from Nov 11, 2026, 18:18 UTC.

Watch

Get told when its tools change: a new tool, a new description, a new class.

https://radar.anlyon.com/servers/ai.enscon/circuit-sim/changes.xml

An Atom feed. Works in any feed reader or Slack's RSS app.

Badge

Anlyon Radar badge for ai.enscon/circuit-sim
[![Anlyon Radar](https://radar.anlyon.com/badge/ai.enscon/circuit-sim.svg)](https://radar.anlyon.com/servers/ai.enscon/circuit-sim)

Source: MCP Registry. Synced Oct 21, 2026, 17:41 UTC.

Circuit Sim Lab (電路模擬實驗室) MCP server: questions and answers

Answered from the scan above, not from the publisher's description.

Is the Circuit Sim Lab (電路模擬實驗室) MCP server safe?

No scan can promise that. What its definitions show: 6 tools, 5 of which can change, send or delete something, and 0 findings from fixed checks. Allow the reads, ask before each change, and deny the deletes; the permissions block on this page does that.

Can the Circuit Sim Lab (電路模擬實驗室) MCP server delete data?

No tool is classed as destructive: going by their definitions, none of them deletes, cancels or revokes anything.

Can the Circuit Sim Lab (電路模擬實驗室) MCP server do things that cannot be undone?

No tool is classed as irreversible: none of them sends, pays, publishes or merges, going by their definitions.

What tools does the Circuit Sim Lab (電路模擬實驗室) MCP server have?

6 tools: 5 write, 1 read. impedance, crosstalk, xtal_load_cap, output_voltage_tolerance, inrush_current and diff_skew.

Does the Circuit Sim Lab (電路模擬實驗室) MCP server need sign-in or OAuth?

Its remote endpoint listed its tools to an anonymous client, without sign-in.

Does the Circuit Sim Lab (電路模擬實驗室) MCP server send data to outside services?

None of its tools sends, posts or publishes, or takes a recipient, channel or URL.

Has the Circuit Sim Lab (電路模擬實驗室) MCP server changed its tools?

Not since Anlyon Radar started tracking it. Last scanned Nov 11, 2026.