FreelancerTax — Canadian self-employed tax math MCP server
ca.freelancertax/freelancertaxfreelancertax.castreamable-httpv1.0.0Scanned
Verified Canadian self-employed tax math: SE tax, CPP, GST/HST, instalments, CRA deadlines. Free.
6 tools: 4 change things and 2 only read.
- Reads private data · 0
- Reads text others write · 0
- Can send data out · 0
- No findings
Tools listed without sign-in. Remote posture
With Anlyon
4 tools here change things. Govern them.
- Anlyon lists the tools and adopts none.
- Each tool you adopt gets approvals and receipts.
- Your agent never holds the key.
A tool your agent calls directly is not routed through Anlyon and is not governed by it. Anlyon Radar only lists and labels, and these labels are the same either way.
What the FreelancerTax — Canadian self-employed tax math MCP server can do
The FreelancerTax — Canadian self-employed tax math MCP server is published by freelancertax.ca, a domain the MCP Registry verified. It has 6 tools. It can create or change data (4 tools: estimate_self_employed_tax, cpp_self_employed, gst_hst_registration_check and instalment_plan), but cannot delete data. 2 tools only read.
None of its tools reads private data, brings in text other people write, or sends data out.
None of the fixed checks matched anything in its tool definitions. That is not a safety guarantee.
Its remote endpoint lists its tools without sign-in.
Last scanned Nov 12, 2026, version 1.0.0.
Tools
Grouped by what each tool does, most consequential first. Open one for its reasons and full description; descriptions are the publisher's own words.
6 tools
Changes things 4Claude Code: ask
cpp_self_employedCompute self-employed CPP contributions for a given year: base + enhanced contributions, CPP2 (second ceiling), total payable, and the tax-deduction vs tax-credit split that goes o…No findings
Why it is in this group
- Nothing in its name or description says what it does, so it is counted as a write.
Description, as the server wrote it Compute self-employed CPP contributions for a given year: base + enhanced contributions, CPP2 (second ceiling), total payable, and the tax-deduction vs tax-credit split that goes on the T1 (Schedule 8). Quebec residents pay QPP instead — use estimate_self_employed_tax with province QC for QPP.
estimate_self_employed_taxEstimate a Canadian self-employed (sole proprietor) person's full tax bill: federal tax, provincial tax, CPP/QPP (incl.No findings
Why it is in this group
- Nothing in its name or description says what it does, so it is counted as a write.
Description, as the server wrote it Estimate a Canadian self-employed (sole proprietor) person's full tax bill: federal tax, provincial tax, CPP/QPP (incl. CPP2/QPP + QPIP for Quebec), total, after-tax income and effective rate. Fully verified provinces: ON, BC, AB, MB, SK, NS, NB, QC. Other provinces/territories return an honest federal+CPP-only partial estimate flagged supported:false.
gst_hst_registration_checkCheck whether a Canadian small business / freelancer must register for GST/HST under the $30,000 small-supplier tests (single-quarter test and rolling four-quarter test), with the …No findings
Why it is in this group
- Nothing in its name or description says what it does, so it is counted as a write.
Description, as the server wrote it Check whether a Canadian small business / freelancer must register for GST/HST under the $30,000 small-supplier tests (single-quarter test and rolling four-quarter test), with the exact mechanics of when to charge and the registration deadline. Set is_rideshare true for taxi/ride-share drivers (they must register from the first fare).
instalment_planDetermine whether a Canadian individual must pay quarterly income-tax instalments (the $3,000 / $1,800-Quebec net-tax-owing tests) and compute all three CRA payment options (no-cal…No findings
Why it is in this group
- Nothing in its name or description says what it does, so it is counted as a write.
Description, as the server wrote it Determine whether a Canadian individual must pay quarterly income-tax instalments (the $3,000 / $1,800-Quebec net-tax-owing tests) and compute all three CRA payment options (no-calculation, prior-year, current-year) as quarterly schedules with a suggested no-interest choice. Per the CRA's instalment calculation chart, 'net tax owing' EXCLUDES CPP contributions and EI premiums payable — pass those separately as cpp_payable and they are added to the instalment amounts only (chart line 24), never to the threshold test.
Only reads 2Show 2 read-only tools
get_tax_deadlinesUpcoming CRA tax deadlines for Canadian freelancers / self-employed individuals (filing, payment, GST/HST, RRSP, quarterly instalments), each on its CRA effective date with the wee…No findings
Why it is in this group
- The name "get_tax_deadlines" says "get": a word for reading.
Description, as the server wrote it Upcoming CRA tax deadlines for Canadian freelancers / self-employed individuals (filing, payment, GST/HST, RRSP, quarterly instalments), each on its CRA effective date with the weekend next-business-day rule applied. Also available as a subscribable calendar feed.
gst_quick_method_compareCompare the GST/HST Quick Method against the regular method for a Canadian small business: eligibility (revenue ceiling + excluded professions), remittance under each method, and w…No findings
Why it is in this group
- The name "gst_quick_method_compare" says "compare": a word for reading.
Description, as the server wrote it Compare the GST/HST Quick Method against the regular method for a Canadian small business: eligibility (revenue ceiling + excluded professions), remittance under each method, and which one keeps more money. Annual figures.
This is not a safety rating, and no finding is not a safety guarantee. The groups and findings come from fixed checks of the tool definitions the server returned on the date shown, not from its code or what it does when called. How the checks work.
Exfil surface
Which tools read private data, which read text someone else can write, and which can send data out. One of each is a path a prompt injection can use.
No private-data, untrusted-input, outbound path in this server alone: no tool is tagged private-data or untrusted-input or outbound.
- Reads private data0
- Reads files, mail, messages, databases, secrets, calendars or repositories.
- Reads text others write0
- Brings in text someone else can write: web pages, inbound email, messages, issues and comments.
- Can send data out0
- Can carry data to people or systems: it sends, posts or publishes, or takes a recipient, channel or URL.
Other servers in the same agent add their own tools to these paths. Audit your whole setup to see them together.
Remote posture
What anyone on the internet sees at the remote endpoint: an anonymous initialize and tools/list, and the public OAuth metadata.
Looked at Nov 20, 2026, 18:31 UTC, unchanged since Nov 6, 2026. No credentials were sent and no tool was called. What is looked at.
- Reachable
- yes
- HTTP status of an anonymous initialize
- 200
- tools/list served without credentials
- yes
- Tools that change things, listed without credentials
- 4
- Protocol version
- 2025-06-18
- WWW-Authenticate on 401
- not observed
- resource_metadata in WWW-Authenticate
- not observed
- RFC 9728 protected resource metadata
- not observed
- Authorization servers
- not observed
- Legacy HTTP+SSE transport
- no
- Dynamic client registration
- not observed
- Client ID metadata documents
- not observed
- WarnThe whole server
The endpoint served tools/list without credentials, and the list has 4 tools that change things (4 write). Whether a call also works without credentials was not tested: tools are never called.
What this check looks forMatched text
https://freelancertax.ca/mcp: tools/list returned 6 tools to an anonymous client, including estimate_self_employed_tax (write), cpp_self_employed (write), gst_hst_registration_check (write), instalment_plan (write)
Posture changes
- Nov 6, 2026
- Reachable: no to yes
- HTTP status of an anonymous initialize: none to 200
- tools/list served without credentials: no to yes
- Tools that change things, listed without credentials: 0 to 4
- Protocol version: none to 2025-06-18
- Oct 29, 2026
- Reachable: yes to no
- HTTP status of an anonymous initialize: 200 to none
- tools/list served without credentials: yes to no
- Tools that change things, listed without credentials: 4 to 0
- Protocol version: 2025-06-18 to none
Findings
Matches of fixed checks, with the text they matched.
No check matched anything in these tool definitions. That is not a safety guarantee.
History
Changes to its tool definitions and to its remote endpoint, newest first.
PostureRemote posture changed. Reachable: no -> yes; HTTP status of an anonymous initialize: none -> 200; tools/list served without credentials: no -> yes (and 2 more).View diff
- Reachable: no to yes
- HTTP status of an anonymous initialize: none to 200
- tools/list served without credentials: no to yes
- Tools that change things, listed without credentials: 0 to 4
- Protocol version: none to 2025-06-18
PostureRemote posture changed. Reachable: yes -> no; HTTP status of an anonymous initialize: 200 -> none; tools/list served without credentials: yes -> no (and 2 more).View diff
- Reachable: yes to no
- HTTP status of an anonymous initialize: 200 to none
- tools/list served without credentials: yes to no
- Tools that change things, listed without credentials: 4 to 0
- Protocol version: 2025-06-18 to none
Install
Pinned to version 1.0.0. Values in angle brackets are yours to fill in.
claude mcp add --transport http freelancertax https://freelancertax.ca/mcpclaude mcp add --transport http freelancertax https://freelancertax.ca/mcpRun in a terminal.
Claude Code permissions
Allow the reads, ask before a change or a way out, deny the deletes. Paste into .claude/settings.json.
{
"permissions": {
"allow": [
"mcp__freelancertax__gst_quick_method_compare",
"mcp__freelancertax__get_tax_deadlines"
],
"ask": [
"mcp__freelancertax__estimate_self_employed_tax",
"mcp__freelancertax__cpp_self_employed",
"mcp__freelancertax__gst_hst_registration_check",
"mcp__freelancertax__instalment_plan"
],
"deny": []
}
}Tools that only read are allowed, tools that change things ask first, tools that delete or cancel are denied. A read that can send data out (it takes a URL, say) asks first too. It assumes the server is installed as freelancertax. Review it before you use it.
Pin
Keep the decision: fail CI when the tools change, follow every change, or show a badge.
Pin in CI
Fail a build when the tools you reviewed are not the tools the server serves today.
curl -s "https://radar.anlyon.com/api/v1/servers/ca.freelancertax/freelancertax/verify?hash=ca3295fdbcd6da8a355e76feaa54f0bbc75cbd162bec6c28cc184bf7cc03d5ee" | jq -e '.changed == false'Pinned hash ca3295fdbcd6, from Nov 12, 2026, 07:17 UTC.
Watch
Get told when its tools change: a new tool, a new description, a new class.
https://radar.anlyon.com/servers/ca.freelancertax/freelancertax/changes.xmlAn Atom feed. Works in any feed reader or Slack's RSS app.
Badge
[](https://radar.anlyon.com/servers/ca.freelancertax/freelancertax)Source: MCP Registry. Synced Oct 21, 2026, 17:46 UTC.
FreelancerTax — Canadian self-employed tax math MCP server: questions and answers
Answered from the scan above, not from the publisher's description.
Is the FreelancerTax — Canadian self-employed tax math MCP server safe?
- No scan can promise that. What its definitions show: 6 tools, 4 of which can change, send or delete something, and 0 findings from fixed checks. Allow the reads, ask before each change, and deny the deletes; the permissions block on this page does that.
Can the FreelancerTax — Canadian self-employed tax math MCP server delete data?
- No tool is classed as destructive: going by their definitions, none of them deletes, cancels or revokes anything.
Can the FreelancerTax — Canadian self-employed tax math MCP server do things that cannot be undone?
- No tool is classed as irreversible: none of them sends, pays, publishes or merges, going by their definitions.
What tools does the FreelancerTax — Canadian self-employed tax math MCP server have?
- 6 tools: 4 write, 2 read. estimate_self_employed_tax, cpp_self_employed, gst_hst_registration_check, instalment_plan, gst_quick_method_compare and get_tax_deadlines.
Does the FreelancerTax — Canadian self-employed tax math MCP server need sign-in or OAuth?
- Its remote endpoint listed its tools to an anonymous client, without sign-in.
Does the FreelancerTax — Canadian self-employed tax math MCP server send data to outside services?
- None of its tools sends, posts or publishes, or takes a recipient, channel or URL.
Has the FreelancerTax — Canadian self-employed tax math MCP server changed its tools?
- Not since Anlyon Radar started tracking it. Last scanned Nov 12, 2026.