Glazecalc MCP server
com.glazecalcapp/glazecalcglazecalcapp.comstreamable-httpv1.4.0Scanned
Ceramic glaze chemistry: unity formulas, limit checks, substitutes, cones and potters' guides.
34 tools: 7 can delete or cancel things, 12 change things and 15 only read.
- Reads private data · 3
- Reads text others write · 1
- Can send data out · 0
- 1 finding
Tools listed without sign-in. Remote posture
With Anlyon
7 tools here can delete or cancel things. Govern them.
- Anlyon lists the tools and adopts none.
- Each tool you adopt gets approvals and receipts.
- Your agent never holds the key.
A tool your agent calls directly is not routed through Anlyon and is not governed by it. Anlyon Radar only lists and labels, and these labels are the same either way.
What the Glazecalc MCP server can do
The Glazecalc MCP server is published by glazecalcapp.com, a domain the MCP Registry verified. It has 34 tools. It can delete or cancel things (7 tools: update_recipe, update_my_material, remove_from_shelf, undo_shelf_change and 3 more) and create or change data (12 tools: check_limits, convert_cone_temperature, specific_gravity_water, match_from_materials and 8 more). 15 tools only read.
3 tools read private data (get_recipe, get_firing and list_notes); 1 tool brings in text other people can write (get_my_settings).
The fixed checks matched 1 finding (annotation-conflict). Each one comes with the text it matched.
Its remote endpoint lists its tools without sign-in, and its tools changed 3 times since Anlyon Radar first saw them.
Last scanned Nov 17, 2026, version 1.4.0.
Tools
Grouped by what each tool does, most consequential first. Open one for its reasons and full description; descriptions are the publisher's own words.
34 tools
Deletes or cancels 7Claude Code: deny
add_firing_rowsAdds rows to the end of one of your firing logs (an id from list_firings), in the log's own columns (get_firing gives them): the readings dictated during a firing.No findings
Why it is in this group
- The name "add_firing_rows" says "add": a word for a change.
- The server marks it destructive (destructiveHint: true).
Description, as the server wrote it Adds rows to the end of one of your firing logs (an id from list_firings), in the log's own columns (get_firing gives them): the readings dictated during a firing. The rows already there stay as they are, and the log as it was is kept as an earlier version. At most 500 rows a log. Save only what the person said and agreed to; never fill in an amount, temperature or analysis they did not give. Needs an access token that can read and change your records.
Annotations the server declares
- readOnlyHint: false
- destructiveHint: true
- idempotentHint: false
- openWorldHint: false
link_firingLinks one of your recipes to a firing log it went through, as the recipe page does, and sets what came of it there: the result in the person's words (at most 500 characters), and t…No findings
Why it is in this group
- The name "link_firing" says "link": a word for a change.
- The server marks it destructive (destructiveHint: true).
Description, as the server wrote it Links one of your recipes to a firing log it went through, as the recipe page does, and sets what came of it there: the result in the person's words (at most 500 characters), and the cone and atmosphere when they differ from the log. Linked already, it changes only what is given. A recipe links to at most 100 logs. Taking a link off is done on the website. Save only what the person said and agreed to; never fill in an amount, temperature or analysis they did not give. Needs an access token that can read and change your records.
Annotations the server declares
- readOnlyHint: false
- destructiveHint: true
- idempotentHint: false
- openWorldHint: false
move_to_trashMoves one of your recipes, materials, notebook entries or firing logs to the Trash, as removing it on the website does.No findings
Why it is in this group
- The name "move_to_trash" says "move": a word for a change.
- The server marks it destructive (destructiveHint: true).
Description, as the server wrote it Moves one of your recipes, materials, notebook entries or firing logs to the Trash, as removing it on the website does. It can be put back from the Trash on the website for 30 days; nothing is deleted for good. A token moves at most 100 an hour, and none while the Trash is full. Remove only what the person asked to remove. Needs an access token that can read and change your records.
Annotations the server declares
- readOnlyHint: false
- destructiveHint: true
- idempotentHint: true
- openWorldHint: false
remove_from_shelfTakes materials off the shelf of materials on hand, by name.No findings
Why it is in this group
- The name "remove_from_shelf" says "remove": a word for removing or ending something.
- The server marks it destructive (destructiveHint: true).
Description, as the server wrote it Takes materials off the shelf of materials on hand, by name. The materials themselves stay. The shelf as it was is kept: undo_shelf_change puts it back. Needs an access token that can read and change your records.
Annotations the server declares
- readOnlyHint: false
- destructiveHint: true
- idempotentHint: false
- openWorldHint: false
undo_shelf_changePuts back the shelf as it was before its last change (by the website, an access token or an assistant).No findings
Why it is in this group
- The description's first verb is "put": a word for a change.
- The server marks it destructive (destructiveHint: true).
Description, as the server wrote it Puts back the shelf as it was before its last change (by the website, an access token or an assistant). One step back only: a second call finds nothing to undo until the shelf changes again. Needs an access token that can read and change your records.
Annotations the server declares
- readOnlyHint: false
- destructiveHint: true
- idempotentHint: false
- openWorldHint: false
update_my_materialChanges one of your own materials (an id from list_my_materials): its name, oxide analysis in weight percent, loss on ignition or notes.No findings
Why it is in this group
- The name "update_my_material" says "update": a word for a change.
- The server marks it destructive (destructiveHint: true).
Description, as the server wrote it Changes one of your own materials (an id from list_my_materials): its name, oxide analysis in weight percent, loss on ignition or notes. Only what is given changes. Recipes already saved keep their own copy of it. The material as it was is kept as an earlier version, so the person can undo the change on the website. Needs an access token that can read and change your records.
Annotations the server declares
- readOnlyHint: false
- destructiveHint: true
- idempotentHint: false
- openWorldHint: false
update_recipeChanges one of your saved recipes (an id from list_recipes): its title, its base materials and amounts (the unity formula is worked out again), its notes, firing band or food-surfa…No findings
Why it is in this group
- The name "update_recipe" says "update": a word for a change.
- The server marks it destructive (destructiveHint: true).
Description, as the server wrote it Changes one of your saved recipes (an id from list_recipes): its title, its base materials and amounts (the unity formula is worked out again), its notes, firing band or food-surface mark. Only what is given changes. The recipe as it was is kept as an earlier version, so the person can undo the change on the website. Needs an access token that can read and change your records.
Annotations the server declares
- readOnlyHint: false
- destructiveHint: true
- idempotentHint: false
- openWorldHint: false
Changes things 12Claude Code: ask
add_my_materialSaves a material of your own in your Glazecalc account (the Materials page) from its oxide analysis in weight percent, as on a data sheet, with its loss on ignition.No findings
Why it is in this group
- The name "add_my_material" says "add": a word for a change.
Description, as the server wrote it Saves a material of your own in your Glazecalc account (the Materials page) from its oxide analysis in weight percent, as on a data sheet, with its loss on ignition. Recipes can then use it by name. Needs an access token that can read and change your records.
Annotations the server declares
- readOnlyHint: false
- destructiveHint: false
- idempotentHint: false
- openWorldHint: false
add_notebook_entryAdds an entry to your Glazecalc notebook (the Notebook page), with an optional title: a test result, an observation, a firing to try.No findings
Why it is in this group
- The name "add_notebook_entry" says "add": a word for a change.
Description, as the server wrote it Adds an entry to your Glazecalc notebook (the Notebook page), with an optional title: a test result, an observation, a firing to try. With about, it is a note about one of your recipes, materials or firing logs, which list_notes finds by that record's id. Needs an access token that can read and change your records.
Annotations the server declares
- readOnlyHint: false
- destructiveHint: false
- idempotentHint: false
- openWorldHint: false
add_to_shelfMarks materials as on hand (the shelf that Match with what I have uses), by the library's names or your own materials'.No findings
Why it is in this group
- The name "add_to_shelf" says "add": a word for a change.
Description, as the server wrote it Marks materials as on hand (the shelf that Match with what I have uses), by the library's names or your own materials'. The shelf as it was is kept: undo_shelf_change puts it back. Needs an access token that can read and change your records.
Annotations the server declares
- readOnlyHint: false
- destructiveHint: false
- idempotentHint: false
- openWorldHint: false
blend_recipesWorks out the test tiles of a line blend between recipes a and b (2 to 11 steps), or of a triaxial blend when c is given too (2 to 6 rows, up to 21 tiles), as the Blends page of th…No findings
Why it is in this group
- Nothing in its name or description says what it does, so it is counted as a write.
- The server marks it read-only (readOnlyHint: true), but an annotation never lowers a class.
Description, as the server wrote it Works out the test tiles of a line blend between recipes a and b (2 to 11 steps), or of a triaxial blend when c is given too (2 to 6 rows, up to 21 tiles), as the Blends page of the Glazecalc app does. Each tile is a mix of the corner recipes, each taken as a percent of its base: its shares, its recipe in percent, its key unity formula figures (silica, alumina, boron, the fluxes), silica to alumina, calculated expansion, its place on the Stull chart (stull), the names of the limit cautions it has, and, with a firing, whether its chemistry fits that firing (coneFit verdict). With two recipes and steps 2 it compares them oxide by oxide (differences). Give base materials only, no colorants. This is a calculation from published figures, not a test result: the tiles, fired, decide, and the cautions are guides, not a guarantee of food safety.
Annotations the server declares
- readOnlyHint: true
- destructiveHint: false
- idempotentHint: true
- openWorldHint: false
check_limitsChecks a glaze recipe for what is past a recommended limit for its firing (too much boron or alkali, too little alumina, too little or too much clay, rising expansion...) and says …No findings
Why it is in this group
- Nothing in its name or description says what it does, so it is counted as a write.
- The server marks it read-only (readOnlyHint: true), but an annotation never lowers a class.
Description, as the server wrote it Checks a glaze recipe for what is past a recommended limit for its firing (too much boron or alkali, too little alumina, too little or too much clay, rising expansion...) and says what the fired glaze will likely do, as the Glazecalc app does. A cone is checked in the band the recipe page gives it (low cone 06-02, mid 1-7, high 8-11); from cone 12 up (band 'top') no published limits reach, so the band's limits are not checked and limitsNote says so. With a firing, coneFit says whether the chemistry looks like that firing's, by Katz's boron rule and Hesselberth & Roy's silica and alumina whatever limit set is chosen: verdict 'cooler' or 'hotter' only when boron and silica or alumina agree on another band; 'fits' (nothing points away, not a pass); 'skipped' where the published figures do not reach (lead, lithium, much soda and potash or zinc, raku, cones 01 to 3, cooler than cone 06 or hotter than cone 10...). Cone 6 against cone 10 is told apart only roughly (strength 'soft'). stull says where the recipe sits on Stull's chart, as analyze_recipe gives it; Stull fired his tests at about cone 11 with fixed fluxes, so at other cones, with boron or with other fluxes the regions move. These are cautions and guides from published figures, not a test and not a guarantee of food safety.
Annotations the server declares
- readOnlyHint: true
- destructiveHint: false
- idempotentHint: true
- openWorldHint: false
convert_cone_temperatureConverts between a pyrometric cone and its temperature, and between °C and °F.1 finding
Why it is in this group
- The name "convert_cone_temperature" says "convert": a word for a change.
- The server marks it read-only (readOnlyHint: true), but an annotation never lowers a class.
Findings
- Warn
The server marks "convert_cone_temperature" read-only (readOnlyHint: true), and its own name, description or input give the class "write".
What this check looks forMatched text
annotations: {"readOnlyHint":true,"destructiveHint":false,"idempotentHint":true,"openWorldHint":false}; The name "convert_cone_temperature" says "convert": a word for a change.
Description, as the server wrote it Converts between a pyrometric cone and its temperature, and between °C and °F. Orton cones run 022 to 42: Glazecalc's figure, from 022 to 15, is Orton's older chart for large cones at 150 °C an hour (cone 05.5, which that chart lacks, is Orton's 2016 figure for large cones at that rate, and the other half cones are put halfway between their neighbours), and Orton's current figures (self-supporting cones at 15, 60 and 150 °C an hour, large cones at 60 and 150, cone 022 to 14) come beside it; Orton publishes no figure above cone 14, so cones from 16 up have none. SK cones (JIS R 8101, SK 022 to SK 20) by the standard's nominal figures. Give a cone, or a temperature to find the nearest cones.
Annotations the server declares
- readOnlyHint: true
- destructiveHint: false
- idempotentHint: true
- openWorldHint: false
create_firing_logSaves a new firing log in your Glazecalc account (the Firing page): its title, the day, the kiln, the columns kept (time, temperature, cone, atmosphere, comments...) and a row for …No findings
Why it is in this group
- The name "create_firing_log" says "create": a word for a change.
Description, as the server wrote it Saves a new firing log in your Glazecalc account (the Firing page): its title, the day, the kiln, the columns kept (time, temperature, cone, atmosphere, comments...) and a row for each reading, as the person dictated them. Add later readings with add_firing_rows. Save only what the person said and agreed to; never fill in an amount, temperature or analysis they did not give. Needs an access token that can read and change your records.
Annotations the server declares
- readOnlyHint: false
- destructiveHint: false
- idempotentHint: false
- openWorldHint: false
create_recipeSaves a new glaze recipe in your Glazecalc account, from its base materials and amounts (the library's names, or your own materials'), with optional colorants, notes, firing band a…No findings
Why it is in this group
- The name "create_recipe" says "create": a word for a change.
Description, as the server wrote it Saves a new glaze recipe in your Glazecalc account, from its base materials and amounts (the library's names, or your own materials'), with optional colorants, notes, firing band and food-surface mark. Glazecalc works out its unity formula, as the recipe page does, and answers with it. Save only a recipe the person asked to save. Needs an access token that can read and change your records.
Annotations the server declares
- readOnlyHint: false
- destructiveHint: false
- idempotentHint: false
- openWorldHint: false
match_from_materialsRemakes a glaze recipe from only the materials listed in "have", keeping its unity formula as near as they allow, as Match with what I have does in the Glazecalc app.No findings
Why it is in this group
- Nothing in its name or description says what it does, so it is counted as a write.
- The server marks it read-only (readOnlyHint: true), but an annotation never lowers a class.
Description, as the server wrote it Remakes a glaze recipe from only the materials listed in "have", keeping its unity formula as near as they allow, as Match with what I have does in the Glazecalc app. report.closeness says how near the new unity formula comes to the old, oxide by oxide: close (within 0.02, or 5% of a large amount such as silica's), off, or far (more than three times that), with a verdict (close, fair or poor) and a summary. report.miss and report.best are the solver's own scores, for comparing runs. Raw clay is held to 20% of the batch where that costs the match little (report.capped and allowMore say more). Test any suggestion before using it.
Annotations the server declares
- readOnlyHint: true
- destructiveHint: false
- idempotentHint: true
- openWorldHint: false
match_with_what_i_haveRemakes one of your recipes, or a recipe you give, from only the materials on your shelf, keeping its unity formula as near as they allow (Match with what I have).No findings
Why it is in this group
- Nothing in its name or description says what it does, so it is counted as a write.
- The server marks it read-only (readOnlyHint: true), but an annotation never lowers a class.
Description, as the server wrote it Remakes one of your recipes, or a recipe you give, from only the materials on your shelf, keeping its unity formula as near as they allow (Match with what I have). report.closeness says how near the new unity formula comes to the old, oxide by oxide, as match_from_materials does. Test any suggestion before using it.
Annotations the server declares
- readOnlyHint: true
- destructiveHint: false
- idempotentHint: true
- openWorldHint: false
solve_targetMakes a glaze recipe, in percent, from the materials given whose unity formula comes as near a target as they allow (Solve for a target in the Glazecalc app).No findings
Why it is in this group
- Nothing in its name or description says what it does, so it is counted as a write.
- The server marks it read-only (readOnlyHint: true), but an annotation never lowers a class.
Description, as the server wrote it Makes a glaze recipe, in percent, from the materials given whose unity formula comes as near a target as they allow (Solve for a target in the Glazecalc app). The target is a unity formula (moles; the fluxes are scaled to add up to 1) or an oxide analysis (percent by weight of the fired glaze), with potash and soda apart. Give the materials by their library names, or onHand for the materials on the person’s shelf (with a token or connected app that may read it). closeness says how near each oxide comes: close (within 0.02, or 5% of a large amount such as silica’s), off, or far (more than three times that), with a verdict (close, fair or poor) and a summary; unreachable names the target’s oxides nothing given supplies. Raw clay is held to 20% of the batch where that costs the match little (capped and allowMore say more). Test any recipe before using it.
Annotations the server declares
- readOnlyHint: true
- destructiveHint: false
- idempotentHint: true
- openWorldHint: false
specific_gravity_waterWorks out a glaze slurry's specific gravity (SG) from the grams 100 mL of it weighs (or takes the SG), then, for a bucket of it and a target SG, the water to add, or to pour off af…No findings
Why it is in this group
- Nothing in its name or description says what it does, so it is counted as a write.
- The server marks it read-only (readOnlyHint: true), but an annotation never lowers a class.
Description, as the server wrote it Works out a glaze slurry's specific gravity (SG) from the grams 100 mL of it weighs (or takes the SG), then, for a bucket of it and a target SG, the water to add, or to pour off after the glaze settles, as the recipe page's Specific gravity and water does. The water to add needs nothing else. The dry glaze per litre and the dry glaze and water the bucket holds (Brongniart's formula) need the dry materials' own SG: give drySg, or give the recipe's lines and it is estimated from each material (its mineral's measured density; 2.6 for commercial feldspars and clays; a frit from its oxides by Appen's glass factors), with drySgBasis saying how. Materials with no estimate (bentonite, stains, mixed borates, a potter's own) may be up to 5% of the weight and are left out; with more, there is no estimate. A drySg given wins over the estimate. Nothing is assumed otherwise. Water is 1; many dipping glazes are mixed near 1.4 to 1.5, but the right SG is the one that gives the thickness you tested.
Annotations the server declares
- readOnlyHint: true
- destructiveHint: false
- idempotentHint: true
- openWorldHint: false
Only reads 15Show 15 read-only tools
analyze_recipeWorks out a glaze recipe's unity (Seger) formula, oxide groups, silica to alumina ratio, fired analysis, loss on ignition and calculated thermal expansion, as the Glazecalc app doe…No findings
Why it is in this group
- The name "analyze_recipe" says "analyze": a word for reading.
Description, as the server wrote it Works out a glaze recipe's unity (Seger) formula, oxide groups, silica to alumina ratio, fired analysis, loss on ignition and calculated thermal expansion, as the Glazecalc app does. stull says where the recipe sits on Stull's chart (1912, as the recipe page draws it): silica and alumina in moles, the region (unfused, matte, semi-matte, bright or underfired) and whether it falls in the crazed area; a guide to the surface, not a promise. Stull fired his tests at about cone 11 with fixed fluxes, so at other cones, with boron or with other fluxes the regions move, and the crazed area is not a test of fit on your clay.
Annotations the server declares
- readOnlyHint: true
- destructiveHint: false
- idempotentHint: true
- openWorldHint: false
compare_recipesCompares two glaze recipes side by side: for each, its recipe in percent, key unity formula figures, flux ratio (R2O against RO), silica to alumina, calculated expansion, place on …No findings
Why it is in this group
- The name "compare_recipes" says "compare": a word for reading.
Description, as the server wrote it Compares two glaze recipes side by side: for each, its recipe in percent, key unity formula figures, flux ratio (R2O against RO), silica to alumina, calculated expansion, place on Stull's chart (stull), the names of the limit cautions it has and, with a firing, whether its chemistry fits that firing (coneFit verdict); then what changes from A to B oxide by oxide (differences), which materials are in A only, in B only, or in both, with their percents, and a summary of the differences that matter (flux ratio, silica to alumina, silica, alumina and boron, expansion with fitFlag when the two differ by 0.3 x10^-6 per °C or more, so they may fit the same clay differently, Stull regions, the cautions only one side has, and coneFit). Give each recipe as lines (a, b) or, signed in to Glazecalc, one of your own saved recipes by its id from list_recipes (aRecipeId, bRecipeId): one or the other for each side. It is the same comparison blend_recipes makes with two recipes and two steps, under a name that is easy to find. Give base materials only, no colorants. This is a calculation from published figures, not a test result: fire both, and the tiles decide.
Annotations the server declares
- readOnlyHint: true
- destructiveHint: false
- idempotentHint: true
- openWorldHint: false
get_firingOne firing log from your account: its columns (time, temperature, cone...) and rows, and its notes.Reads private dataNo findings
Why it is in this group
- The name "get_firing" says "get": a word for reading.
What it can reach
- private-dataThe description's first sentence says "note": it reads notes.
Description, as the server wrote it One firing log from your account: its columns (time, temperature, cone...) and rows, and its notes.
Annotations the server declares
- readOnlyHint: true
- destructiveHint: false
- idempotentHint: true
- openWorldHint: false
get_materialOne material from Glazecalc's library: its oxides, loss on ignition, whether it is discontinued and what replaces it, where it is sold, hazards and the data sheet it comes from.No findings
Why it is in this group
- The name "get_material" says "get": a word for reading.
Description, as the server wrote it One material from Glazecalc's library: its oxides, loss on ignition, whether it is discontinued and what replaces it, where it is sold, hazards and the data sheet it comes from.
Annotations the server declares
- readOnlyHint: true
- destructiveHint: false
- idempotentHint: true
- openWorldHint: false
get_my_settingsYour Glazecalc settings that matter when talking about glazes: region, temperature scale, cones, language, weight unit, whether lead may be suggested, the limit set recipes are che…Reads text others writeNo findings
Why it is in this group
- The name "get_my_settings" says "get": a word for reading.
What it can reach
- untrusted-inputThe description's first sentence says "website": it reads web pages, which anyone can write.
Description, as the server wrote it Your Glazecalc settings that matter when talking about glazes: region, temperature scale, cones, language, weight unit, whether lead may be suggested, the limit set recipes are checked against, the currency your prices are in (never the prices), and whether changes made by assistants wait for your approval on the website (confirmChanges: off, removals or all; it can be changed only there).
Annotations the server declares
- readOnlyHint: true
- destructiveHint: false
- idempotentHint: true
- openWorldHint: false
get_recipeOne recipe from your account: its materials and amounts, colorants, notes, its stated firing (firedAt: the cone scale, the low and optional high cone of the claimed range, the cone…Reads private dataNo findings
Why it is in this group
- The name "get_recipe" says "get": a word for reading.
What it can reach
- private-dataThe description's first sentence says "note": it reads notes.
Description, as the server wrote it One recipe from your account: its materials and amounts, colorants, notes, its stated firing (firedAt: the cone scale, the low and optional high cone of the claimed range, the cones the potter has test-fired, left out when none is ticked, because a stated cone from a book is not a tested one; the atmospheres and processes, and for a temperature the rate and hold; each cone exactly as the potter gave it), whether it is for a food surface, the firing logs it went through with a result note each and, where known, the cone and atmosphere each was fired at, the potter’s summary of how it came out at each cone and atmosphere (coneResults; one outside the stated firing is kept), the firing band and target specific gravity saved with it, and its unity formula worked out afresh. It is checked against the limit set chosen in your settings: for the firing given here, or else the band chosen on the recipe, or else the bands its stated firing falls in (a range across two bands is checked at each). A firing from cone 12 up is band 'top', where no limit set has figures: its limits are not checked, and limitsNote says so. coneFit says, for the same firing, whether the chemistry looks like that firing's, as the recipe page's limits panel does: by Katz's boron rule and Hesselberth & Roy's silica and alumina whatever limit set is chosen, a note (verdict 'cooler' or 'hotter') only when boron and silica or alumina agree on another band, 'closer' when a range across bands looks nearer one end, 'fits' when nothing points away (not a pass), 'skipped' where the published figures do not reach (among them firings cooler than cone 06 or hotter than cone 10). Cone 6 against cone 10 is told apart only roughly (strength 'soft'). A guide, not a test.
Annotations the server declares
- readOnlyHint: true
- destructiveHint: false
- idempotentHint: true
- openWorldHint: false
get_shelfThe materials you marked as on hand in Glazecalc (the shelf that Match with what I have uses).No findings
Why it is in this group
- The name "get_shelf" says "get": a word for reading.
Description, as the server wrote it The materials you marked as on hand in Glazecalc (the shelf that Match with what I have uses).
Annotations the server declares
- readOnlyHint: true
- destructiveHint: false
- idempotentHint: true
- openWorldHint: false
list_firingsLists the firing logs saved in your Glazecalc account, newest first.No findings
Why it is in this group
- The name "list_firings" says "list": a word for reading.
Description, as the server wrote it Lists the firing logs saved in your Glazecalc account, newest first.
Annotations the server declares
- readOnlyHint: true
- destructiveHint: false
- idempotentHint: true
- openWorldHint: false
list_my_materialsLists the materials you have saved in your own Glazecalc account (not the shared library), with their oxides.No findings
Why it is in this group
- The name "list_my_materials" says "list": a word for reading.
Description, as the server wrote it Lists the materials you have saved in your own Glazecalc account (not the shared library), with their oxides.
Annotations the server declares
- readOnlyHint: true
- destructiveHint: false
- idempotentHint: true
- openWorldHint: false
list_notesThe notes in your Glazecalc notebook, newest first, optionally only those about one record (a recipe, material or firing log id).Reads private dataNo findings
Why it is in this group
- The name "list_notes" says "list": a word for reading.
What it can reach
- private-dataThe name "list_notes" says "list" and "note": it reads notes.
- private-dataThe description's first sentence says "note": it reads notes.
Description, as the server wrote it The notes in your Glazecalc notebook, newest first, optionally only those about one record (a recipe, material or firing log id).
Annotations the server declares
- readOnlyHint: true
- destructiveHint: false
- idempotentHint: true
- openWorldHint: false
list_recipesLists the glaze recipes saved in your Glazecalc account, newest first, optionally only those whose title or a material matches a search, or whose stated firing includes a cone or n…No findings
Why it is in this group
- The name "list_recipes" says "list": a word for reading.
Description, as the server wrote it Lists the glaze recipes saved in your Glazecalc account, newest first, optionally only those whose title or a material matches a search, or whose stated firing includes a cone or names an atmosphere or process ("which of my glazes fire at cone 10 reduction?"). Each lists its stated firing; a recipe with none has not stated one.
Annotations the server declares
- readOnlyHint: true
- destructiveHint: false
- idempotentHint: true
- openWorldHint: false
search_guidesSearches Glazecalc's plain-language guides for potters (glazing from first principles, making a glaze, safe mixing, safety at home with children and pets, firing a kiln, and a comp…No findings
Why it is in this group
- The name "search_guides" says "search": a word for reading.
Description, as the server wrote it Searches Glazecalc's plain-language guides for potters (glazing from first principles, making a glaze, safe mixing, safety at home with children and pets, firing a kiln, and a companion to John Britt's free glaze course, in English only) in the language asked for, or in English where that language has no match. Returns each matching section's title, anchor, a short excerpt, its address on the website and its resource URI, which resources/read returns in full. Use it for glaze defects, safety, firing and terms, and cite the address. Link John Britt's videos by title only; never retell, summarise or quote them.
Annotations the server declares
- readOnlyHint: true
- destructiveHint: false
- idempotentHint: true
- openWorldHint: false
search_materialsFinds ceramic raw materials (feldspars, clays, frits, fluxes) and, if asked, colorants in Glazecalc's library by name, alias or maker.No findings
Why it is in this group
- The name "search_materials" says "search": a word for reading.
Description, as the server wrote it Finds ceramic raw materials (feldspars, clays, frits, fluxes) and, if asked, colorants in Glazecalc's library by name, alias or maker. Use it to find the exact name the other tools take.
Annotations the server declares
- readOnlyHint: true
- destructiveHint: false
- idempotentHint: true
- openWorldHint: false
suggest_substitutesFinds the discontinued or scarce materials in a recipe and the modern ones that replace them, then suggests amounts that keep the unity formula as near as the materials allow, as t…No findings
Why it is in this group
- The description's first verb is "find": a word for reading.
Description, as the server wrote it Finds the discontinued or scarce materials in a recipe and the modern ones that replace them, then suggests amounts that keep the unity formula as near as the materials allow, as the Glazecalc app does. report.closeness says how near the new unity formula comes to the old, oxide by oxide, as match_from_materials does. Test any suggestion before using it.
Annotations the server declares
- readOnlyHint: true
- destructiveHint: false
- idempotentHint: true
- openWorldHint: false
vary_materialShows what one material does to a glaze, by putting more and more of it into a base recipe (an ingredient blend or progression test: whiting 0 to 20, say, in 2 to 11 tiles).No findings
Why it is in this group
- The description's first verb is "show": a word for reading.
Description, as the server wrote it Shows what one material does to a glaze, by putting more and more of it into a base recipe (an ingredient blend or progression test: whiting 0 to 20, say, in 2 to 11 tiles). With mode "add" (the default) it goes on top of the base, so the recipe grows; with mode "replace" the same amount comes out of another material of the base (`instead`), so the total stays the same. Each tile has its amount of the material, its recipe in percent, its key unity formula figures (silica, alumina, boron, the fluxes), silica to alumina, calculated expansion, its place on Stull's chart (stull: region, crazed), the names of the limit cautions it has, and, with a firing, whether its chemistry fits that firing (coneFit verdict), and its flux ratio (fluxRatio: R2O alkalis against RO fluxes, in the unity formula). trend sums up what moves from the first tile to the last (oxides, silica to alumina, expansion, the R2O share of the flux ratio), which Stull regions the tiles cross, the first tile with a limit caution the first tile does not have (firstCaution) and, with a firing, the first whose coneFit verdict changes (firstConeFitChange). Give base materials only, no colorants. This is a calculation from published figures, not a test result: the tiles, fired, decide, and the cautions are guides, not a guarantee of food safety.
Annotations the server declares
- readOnlyHint: true
- destructiveHint: false
- idempotentHint: true
- openWorldHint: false
This is not a safety rating, and no finding is not a safety guarantee. The groups and findings come from fixed checks of the tool definitions the server returned on the date shown, not from its code or what it does when called. How the checks work.
Exfil surface
Which tools read private data, which read text someone else can write, and which can send data out. One of each is a path a prompt injection can use.
No private-data, untrusted-input, outbound path in this server alone: no tool is tagged outbound.
- Reads private data3
- Reads files, mail, messages, databases, secrets, calendars or repositories.
- Reads text others write1
- Brings in text someone else can write: web pages, inbound email, messages, issues and comments.
- Can send data out0
- Can carry data to people or systems: it sends, posts or publishes, or takes a recipient, channel or URL.
Other servers in the same agent add their own tools to these paths. Audit your whole setup to see them together.
Remote posture
What anyone on the internet sees at the remote endpoint: an anonymous initialize and tools/list, and the public OAuth metadata.
Looked at Nov 20, 2026, 18:39 UTC, unchanged since Nov 6, 2026. No credentials were sent and no tool was called. What is looked at.
- Reachable
- yes
- HTTP status of an anonymous initialize
- 200
- tools/list served without credentials
- yes
- Tools that change things, listed without credentials
- 19
- Protocol version
- 2025-06-18
- WWW-Authenticate on 401
- not observed
- resource_metadata in WWW-Authenticate
- not observed
- RFC 9728 protected resource metadata
- https://glazecalcapp.com/.well-known/oauth-protected-resource/mcp
- Authorization servers
- https://glazecalcapp.com
- Legacy HTTP+SSE transport
- no
- Dynamic client registration
- yes
- Client ID metadata documents
- yes
- HighThe whole server
The endpoint served tools/list without credentials, and the list has 19 tools that change things (7 destructive, 12 write). Whether a call also works without credentials was not tested: tools are never called.
What this check looks forMatched text
https://glazecalcapp.com/mcp: tools/list returned 34 tools to an anonymous client, including update_recipe (destructive), update_my_material (destructive), remove_from_shelf (destructive), undo_shelf_change (destructive), move_to_trash (destructive) and 14 more
Posture changes
- Nov 6, 2026
- Tools that change things, listed without credentials: 18 to 19
- Oct 29, 2026
- Tools that change things, listed without credentials: 15 to 18
Findings
Matches of fixed checks, with the text they matched.
The server marks "convert_cone_temperature" read-only (readOnlyHint: true), and its own name, description or input give the class "write".
What this check looks forMatched text
annotations: {"readOnlyHint":true,"destructiveHint":false,"idempotentHint":true,"openWorldHint":false}; The name "convert_cone_temperature" says "convert": a word for a change.
History
Changes to its tool definitions and to its remote endpoint, newest first.
Tools1 added, 13 changed.+1 added~13 changedView diff
- Added:specific_gravity_waterChanges things
- Changed:add_firing_rowsDeletes or cancelsinputSchema
- Changed:analyze_recipeOnly readsdescription
- Changed:check_limitsChanges thingsdescription
- Changed:convert_cone_temperatureChanges thingsdescription
- Changed:get_recipeOnly readsdescription
- Changed:match_from_materialsChanges thingsinputSchema
- Changed:move_to_trashDeletes or cancelsinputSchema
- Changed:search_guidesOnly readsdescriptioninputSchema
- Changed:search_materialsOnly readsinputSchema
- Changed:solve_targetChanges thingsinputSchema
- Changed:suggest_substitutesOnly readsinputSchema
- Changed:update_my_materialDeletes or cancelsinputSchema
- Changed:update_recipeDeletes or cancelsinputSchema
PostureRemote posture changed. Tools that change things, listed without credentials: 18 -> 19.View diff
- Tools that change things, listed without credentials: 18 to 19
Tools2 changed.~2 changedView diff
- Changed:compare_recipesOnly readsdescriptioninputSchema
- Changed:vary_materialOnly readsdescription
PostureRemote posture changed. Tools that change things, listed without credentials: 15 -> 18.View diff
- Tools that change things, listed without credentials: 15 to 18
Tools5 added, 4 changed.+5 added~4 changedView diff
- Added:add_firing_rowsDeletes or cancels
- Added:compare_recipesOnly reads
- Added:create_firing_logChanges things
- Added:link_firingDeletes or cancels
- Added:vary_materialOnly reads
- Changed:add_notebook_entryChanges thingsdescriptioninputSchema
- Changed:analyze_recipeOnly readsdescription
- Changed:blend_recipesChanges thingsdescription
- Changed:check_limitsChanges thingsdescription
Install
Pinned to version 1.4.0. Values in angle brackets are yours to fill in.
claude mcp add --transport http glazecalc https://glazecalcapp.com/mcpclaude mcp add --transport http glazecalc https://glazecalcapp.com/mcpRun in a terminal.
Claude Code permissions
Allow the reads, ask before a change or a way out, deny the deletes. Paste into .claude/settings.json.
{
"permissions": {
"allow": [
"mcp__glazecalc__search_materials",
"mcp__glazecalc__get_material",
"mcp__glazecalc__analyze_recipe",
"mcp__glazecalc__suggest_substitutes",
"mcp__glazecalc__vary_material",
"mcp__glazecalc__compare_recipes",
"mcp__glazecalc__search_guides",
"mcp__glazecalc__list_recipes",
"mcp__glazecalc__get_recipe",
"mcp__glazecalc__list_my_materials",
"mcp__glazecalc__get_shelf",
"mcp__glazecalc__list_firings",
"mcp__glazecalc__get_firing",
"mcp__glazecalc__list_notes",
"mcp__glazecalc__get_my_settings"
],
"ask": [
"mcp__glazecalc__check_limits",
"mcp__glazecalc__convert_cone_temperature",
"mcp__glazecalc__specific_gravity_water",
"mcp__glazecalc__match_from_materials",
"mcp__glazecalc__solve_target",
"mcp__glazecalc__blend_recipes",
"mcp__glazecalc__match_with_what_i_have",
"mcp__glazecalc__create_recipe",
"mcp__glazecalc__add_notebook_entry",
"mcp__glazecalc__add_my_material",
"mcp__glazecalc__add_to_shelf",
"mcp__glazecalc__create_firing_log"
],
"deny": [
"mcp__glazecalc__update_recipe",
"mcp__glazecalc__update_my_material",
"mcp__glazecalc__remove_from_shelf",
"mcp__glazecalc__undo_shelf_change",
"mcp__glazecalc__move_to_trash",
"mcp__glazecalc__add_firing_rows",
"mcp__glazecalc__link_firing"
]
}
}Tools that only read are allowed, tools that change things ask first, tools that delete or cancel are denied. A read that can send data out (it takes a URL, say) asks first too. It assumes the server is installed as glazecalc. Review it before you use it.
Capability tags behind 4 rules
- mcp__glazecalc__get_recipe private-data
- mcp__glazecalc__get_firing private-data
- mcp__glazecalc__list_notes private-data
- mcp__glazecalc__get_my_settings untrusted-input
Pin
Keep the decision: fail CI when the tools change, follow every change, or show a badge.
Pin in CI
Fail a build when the tools you reviewed are not the tools the server serves today.
curl -s "https://radar.anlyon.com/api/v1/servers/com.glazecalcapp/glazecalc/verify?hash=3e619cea6773be5d052297eb3f8b8020f8158805f524f6e88db2c4293fc4889a" | jq -e '.changed == false'Pinned hash 3e619cea6773, from Nov 17, 2026, 13:17 UTC.
Watch
Get told when its tools change: a new tool, a new description, a new class.
https://radar.anlyon.com/servers/com.glazecalcapp/glazecalc/changes.xmlAn Atom feed. Works in any feed reader or Slack's RSS app.
Badge
[](https://radar.anlyon.com/servers/com.glazecalcapp/glazecalc)Source: MCP Registry · repository. Synced Nov 3, 2026, 23:17 UTC.
Glazecalc MCP server: questions and answers
Answered from the scan above, not from the publisher's description.
Is the Glazecalc MCP server safe?
- No scan can promise that. What its definitions show: 34 tools, 19 of which can change, send or delete something, and 1 finding from fixed checks. Allow the reads, ask before each change, and deny the deletes; the permissions block on this page does that.
Can the Glazecalc MCP server delete data?
- Yes. 7 tools can delete, cancel or revoke something: update_recipe, update_my_material, remove_from_shelf, undo_shelf_change, move_to_trash, add_firing_rows and 1 more.
Can the Glazecalc MCP server do things that cannot be undone?
- No tool is classed as irreversible: none of them sends, pays, publishes or merges, going by their definitions.
What tools does the Glazecalc MCP server have?
- 34 tools: 7 destructive, 12 write, 15 read. update_recipe, update_my_material, remove_from_shelf, undo_shelf_change, move_to_trash, add_firing_rows, link_firing, check_limits and 26 more.
Does the Glazecalc MCP server need sign-in or OAuth?
- Its remote endpoint listed its tools to an anonymous client, without sign-in.
Does the Glazecalc MCP server send data to outside services?
- None of its tools sends, posts or publishes, or takes a recipient, channel or URL.
Has the Glazecalc MCP server changed its tools?
- Yes, 3 times since Anlyon Radar started tracking it, most recently on Nov 17, 2026. Every change is on this page and in its Atom feed.