Simple House Planner MCP server
com.simplehouseplanner/floor-planssimplehouseplanner.comstreamable-httpv2.0.0Scanned
Design and change floor plans to scale in 2D and 3D: walls, rooms, roofs, furniture and gardens.
37 tools: 1 can delete or cancel things, 33 change things and 3 only read.
- Reads private data · 0
- Reads text others write · 1
- Can send data out · 0
- 4 findings
Tools listed without sign-in. Remote posture
With Anlyon
1 tool here can delete or cancel things. Govern it.
- Anlyon lists the tools and adopts none.
- Each tool you adopt gets approvals and receipts.
- Your agent never holds the key.
A tool your agent calls directly is not routed through Anlyon and is not governed by it. Anlyon Radar only lists and labels, and these labels are the same either way.
What the Simple House Planner MCP server can do
The Simple House Planner MCP server is published by simplehouseplanner.com, a domain the MCP Registry verified. It has 37 tools. It can delete or cancel things (1 tool: delete_project) and create or change data (33 tools: calculate_stairs, calculate_floor_area, calculate_pool_volume, calculate_plan_scale and 29 more). 3 tools only read.
1 tool brings in text other people can write (list_projects).
The fixed checks matched 4 findings (long-description and annotation-conflict). Each one comes with the text it matched.
Its remote endpoint lists its tools without sign-in, and its tools changed once since Anlyon Radar first saw them.
Last scanned Nov 19, 2026, version 2.0.0.
Tools
Grouped by what each tool does, most consequential first. Open one for its reasons and full description; descriptions are the publisher's own words.
37 tools
Deletes or cancels 1Claude Code: deny
delete_projectPermanently deletes one plan from the person's account.No findings
Why it is in this group
- The name "delete_project" says "delete": a word for removing or ending something.
- The description says "Permanently deletes".
- The server marks it destructive (destructiveHint: true).
Description, as the server wrote it Permanently deletes one plan from the person's account. It cannot be restored. Use this only when the person names the plan to delete in words.
Annotations the server declares
- readOnlyHint: false
- destructiveHint: true
- idempotentHint: true
- openWorldHint: false
- title: Delete plan
Changes things 33Claude Code: ask
account_profileThe stable identifier of the linked Simple House Planner account.No findings
Why it is in this group
- Nothing in its name or description says what it does, so it is counted as a write.
- The server marks it read-only (readOnlyHint: true), but an annotation never lowers a class.
Description, as the server wrote it The stable identifier of the linked Simple House Planner account.
Annotations the server declares
- readOnlyHint: true
- destructiveHint: false
- openWorldHint: false
- title: Account
calculate_bed_fitUse this when someone asks which bed size fits a bedroom, or whether a king, queen or double bed fits.No findings
Why it is in this group
- Nothing in its name or description says what it does, so it is counted as a write.
- The server marks it read-only (readOnlyHint: true), but an annotation never lowers a class.
Description, as the server wrote it Use this when someone asks which bed size fits a bedroom, or whether a king, queen or double bed fits. Checks which US and European beds fit a bedroom with walkways beside and at the foot of the bed, keeping clear of a door's swing and a wardrobe and the walkway in front of it. Returns for each bed whether it fits, the widest walkway it leaves and the smallest room for it; the largest US and European bed that fits; where the chosen bed stands; the floor area; and whether the room meets the smallest bedroom of the IRC (R304: 70 sq ft, 7 ft each way) and of England's nationally described space standard. Beds for two keep a walkway on both sides; beds for one stand against a side wall. Walkways: 24 in at least (Sleep Foundation), 36 in comfortable (Dimensions.com). Beds: bed_twin, bed_single_xl (twin XL), bed_full, bed_queen, bed_king, bed_king_xl (California king), bed_single (90 × 200 cm), bed_three_quarter_xl (100 × 200), bed_three_quarter (120 × 200), bed_double (140 × 200), bed_queen_xl (160 × 200), bed_super_king (180 × 200), bed_double_xl (200 × 200).
Annotations the server declares
- readOnlyHint: true
- destructiveHint: false
- openWorldHint: false
- title: Bed size calculator
calculate_bricksUse this when someone asks how many bricks or concrete blocks a wall needs, and how much mortar or grout.No findings
Why it is in this group
- Nothing in its name or description says what it does, so it is counted as a write.
- The server marks it read-only (readOnlyHint: true), but an annotation never lowers a class.
Description, as the server wrote it Use this when someone asks how many bricks or concrete blocks a wall needs, and how much mortar or grout. Calculates the bricks or concrete blocks for a wall (length × height, or an area) less its doors and windows: the net wall area and the openings in square meters, units per square meter of one wythe with their joints, the height of one course with its joint and the courses in the wall height, the units without waste and the units to buy with waste (5 % when not given; BIA Technical Note 10 and CMHA TEK 04-02A), each rounded up. Brick counts match BIA Technical Note 10, Table 4 (modular 675 per 100 sq ft). Mortar: mortar gives the bags of premixed mortar of each size alone, with 15 % added for waste, the low end of BIA's 15 to 25 % (lb80 and lb60, QUIKRETE Mortar Mix, whose 80 lb bag lays up to 37 standard bricks or 13 blocks of 8 × 8 × 16 in; kg25, a typical 25 kg bag at the same yield per kilogram); cement gives 70 lb bags of masonry cement and sand its kilograms of sand instead (8 bags and 1 short ton of sand lay 1,000 brick-size units or 240 blocks, CMHA TEK 04-02A, Table 2, which includes waste). Other sizes scale these counts by the mortar in the joints: by volume for bricks and solid blocks, by joint length for hollow blocks on face shells. Two wythes of brick add a collar joint. Grout for hollow 6, 8, 10 and 12 in blocks follows CMHA TEK 04-02A, Table 3 (including 3 % waste), scaled by the spacing of the grouted cores: grout in liters and groutBags of 80 lb preblended grout at 0.66 cu ft each.
Annotations the server declares
- readOnlyHint: true
- destructiveHint: false
- openWorldHint: false
- title: Brick and block calculator
calculate_btuUse this when someone asks what size of air conditioner, mini split or heater a room needs, in BTU, tons or watts.No findings
Why it is in this group
- Nothing in its name or description says what it does, so it is counted as a write.
- The server marks it read-only (readOnlyHint: true), but an annotation never lowers a class.
Description, as the server wrote it Use this when someone asks what size of air conditioner, mini split or heater a room needs, in BTU, tons or watts. Calculates the capacity for one room from its floor area. roomAirConditioner: ENERGY STAR's sizing table for room air conditioners (8 ft ceiling): 100 up to 150 sq ft 5,000 BTU/h, 150 up to 250 6,000, 250 up to 300 7,000, 300 up to 350 8,000, 350 up to 400 9,000, 400 up to 450 10,000, 450 up to 550 12,000, 550 up to 700 14,000, 700 up to 1,000 18,000, 1,000 up to 1,200 21,000, 1,200 up to 1,400 23,000, 1,400 up to 1,500 24,000, 1,500 up to 2,000 30,000, 2,000 up to 2,500 34,000; a room under 100 sq ft takes 5,000 and `below` is true; then −10 % heavily shaded, +10 % very sunny, +600 BTU/h for each person beyond two, +4,000 BTU/h in a kitchen. miniSplit: area in sq ft × 25 BTU/h (Carrier, Trane), and the smallest size of Trane's chart that covers it: 6,000, 9,000, 12,000, 15,000, 18,000, 24,000, 30,000, 36,000, 48,000 or 60,000 BTU/h, up to 2,400 sq ft. heater: an electric room heater at 10 W per sq ft as supplemental heat, or 15 W as the sole heat or in a poorly insulated room (Broan-NuTone). It returns the area in square meters, the base and each adjustment, the capacity in BTU/h, tons (12,000 BTU/h) and kilowatts (1 ton = 3.516853 kW, NIST SP 811), and BTU/h per sq ft. None of these is a load calculation; a system for a whole house is sized with ACCA Manual J and Manual S (IRC M1401.3).
Annotations the server declares
- readOnlyHint: true
- destructiveHint: false
- openWorldHint: false
- title: BTU calculator
calculate_concreteUse this when someone asks how much concrete they need for a slab, footing, post holes or steps, or how many bags to buy.No findings
Why it is in this group
- Nothing in its name or description says what it does, so it is counted as a write.
- The server marks it read-only (readOnlyHint: true), but an annotation never lowers a class.
Description, as the server wrote it Use this when someone asks how much concrete they need for a slab, footing, post holes or steps, or how many bags to buy. Calculates the concrete for a slab (length × width × thickness, or area × thickness), a footing (length × width × depth), round columns, piers or post holes (π × (diameter ÷ 2)² × height, less the post that stands in each hole), or solid steps (each step filled down to the ground, the top step being the landing), times a count, plus waste (10 % when not given; NRMCA advises 4 to 10 %). Returns the volume in liters without and with waste, the total in cubic feet and cubic yards (1 cu yd = 764.555 l), the bags of premixed concrete that make the total, by size (lb40, lb60 and lb80: Quikrete bags that make 0.30, 0.45 and 0.60 cu ft; kg20: 10 l, as Blue Circle states; kg25 and kg40: 12.5 and 20 l, as Sievert states), the bags of another product when bagWeight and bagYield are given (bag: count and weight in kilograms), the site mix when mix or all mix fields are given (mix: whole bags of cement and their weight, the sand, stone and water for them in liters, the measure in liters, and the measures of sand, stone and water for each bag), whether the total reaches readyMixLeast (1 cu yd unless given, as ready-mix plants usually deliver no less), and the fewest and the most truckloads at truckMin to truckMax (8 to 12 cu yd unless given).
Annotations the server declares
- readOnlyHint: true
- destructiveHint: false
- openWorldHint: false
- title: Concrete calculator
calculate_deckUse this when someone plans a deck and asks how many deck boards, joists, posts or screws they need.No findings
Why it is in this group
- Nothing in its name or description says what it does, so it is counted as a write.
- The server marks it read-only (readOnlyHint: true), but an annotation never lowers a class.
Description, as the server wrote it Use this when someone plans a deck and asks how many deck boards, joists, posts or screws they need. Calculates the materials for a rectangular deck: the rows of boards ((width + gap) ÷ (board width + gap), rounded up), the length of all boards with waste, the boards of the given length to buy, the joists (length ÷ spacing, rounded up, plus one; each as long as the deck's width), and the screws (two for each board at each joist, IRC R507.7) or hidden clips (one for each board at each joist). Boards run straight or at 45°; diagonal boards take the deck area ÷ (board width + gap). It also returns the widest joist spacing for the decking and layout, and whether the spacing is within it (limit and ok are absent where the source gives no limit for the layout): 5/4 in wood 16 in straight and 12 in diagonal, 2 in wood 24 in (2021 IRC Table R507.7); composite 16 in straight and 12 in diagonal (Trex); GD Holz solid wood 400 mm for 20 or 21 mm boards, 500 mm for 26 mm, 700 mm for 40 mm (Habisreutinger laying guide 2024); Weldom 500 mm, 400 mm for softwood thinner than 27 mm; Neowood 350 or 400 mm by range, 100 mm less at 45°; Tarimatec 350 mm, 250 mm in a tropical climate; Déco 400 mm with visible screws (30 to 40 cm), 300 mm for ipê and 400 mm for teak with clips; Ecodeck 300 mm. doubled counts the second joists under board ends, which joists includes. Waste when not given: 10 % straight, 15 % diagonal. It does not size joists, beams, posts, footings or the ledger; those follow IRC R507 or AWC DCA 6 and the local code. The area is in square meters.
Annotations the server declares
- readOnlyHint: true
- destructiveHint: false
- openWorldHint: false
- title: Deck calculator
calculate_dining_tableUse this when someone asks what size of dining table fits a room or how many people a table seats.No findings
Why it is in this group
- Nothing in its name or description says what it does, so it is counted as a write.
- The server marks it read-only (readOnlyHint: true), but an annotation never lowers a class.
Description, as the server wrote it Use this when someone asks what size of dining table fits a room or how many people a table seats. Calculates dining tables in four shapes (rectangle, square, round, oval) for a number of people, with the smallest room for each at the minimum (36 in, 914 mm) and comfortable (44 in, 1118 mm) clearance from the table edge to the walls; or, from a room size, the table of each shape with the most seats that fits. Rules: 24 in (snug) or 30 in (comfortable) of table edge per person (Dimensions.com); width 36 in up to 8 people and 42 in for more; one person at each end of a rectangle or oval from 5 people; round diameter = people × edge per person ÷ π; clearances from NKBA Kitchen Planning Guideline 8.
Annotations the server declares
- readOnlyHint: true
- destructiveHint: false
- openWorldHint: false
- title: Dining table size calculator
calculate_drywallUse this when someone asks how many sheets of drywall or plasterboard, screws, tape or joint compound they need.No findings
Why it is in this group
- Nothing in its name or description says what it does, so it is counted as a write.
- The server marks it read-only (readOnlyHint: true), but an annotation never lowers a class.
Description, as the server wrote it Use this when someone asks how many sheets of drywall or plasterboard, screws, tape or joint compound they need. Calculates the drywall for a room: the wall area 2 × (length + width) × height, or a given area, less the doors and windows (36 × 80 in and 36 × 60 in each unless given), plus the ceiling (length × width) when asked; the area with waste (10 % unless given; Georgia-Pacific advises 10 to 15 %); and the sheets, rounded up. Sheets: 4x8, 4x10 and 4x12 ft, and metric boards 600, 1200 and 1250 mm wide; sheetWidth and sheetLength together replace them. With 2 layers, the board area and the screws double. It also returns, for the area to cover and without waste, the joint compound in compoundUnit and the joint tape in millimeters for the outer layer, and the screws for all layers, each the area times its rate per square meter of board. Rates when not given (USG): 9.4 gal of ready-mixed compound per 1,000 sq ft (0.383 l/m²), 370 ft of tape per 1,000 sq ft (1.214 m/m²), and screws 1,000 per 1,000 sq ft on framing 16 in on center (10.76/m²), 850 on framing 24 in on center (9.15/m²), Gypsum Construction Handbook. Other makers give their own rates per square meter, such as about 0.35 to 0.45 kg of powder compound and 1.4 to 1.6 m of tape in Europe and Brazil. Areas are in square meters (1 sq ft = 0.09290304 m²; 1 US gallon = 3.785411784 l).
Annotations the server declares
- readOnlyHint: true
- destructiveHint: false
- openWorldHint: false
- title: Drywall calculator
calculate_fenceUse this when someone plans a fence and asks how many posts, rails, boards, panels or bags of concrete they need.1 finding
Why it is in this group
- Nothing in its name or description says what it does, so it is counted as a write.
- The server marks it read-only (readOnlyHint: true), but an annotation never lowers a class.
Findings
- Info
The description is 2,069 characters long, over the 2,000 this check looks for.
What this check looks forMatched text
description ends: "...28.3168 l), or of the given bagWeight and bagYield, with bagsWeight in kilograms."
Description, as the server wrote it Use this when someone plans a fence and asks how many posts, rails, boards, panels or bags of concrete they need. Calculates the materials for a fence: the fenced length (the length less the gates), the sections (fenced length ÷ post spacing, rounded up, plus at most one for each corner), the holes (one for each section, one to end the run and one for each gate) and the posts to buy (the holes less two for each gate set that brings its own posts), and the post length with the part in the ground, following the planning sheet of Outdoor Essentials. Pickets: equal sections, the rails (sections × rails in a section) and the pickets (fenced length ÷ (picket width + gap), plus 10 % spare). Panels and boards: sections one spacing wide and the last one cut (cut, given for a line without corners); panels (one for each section), or boards (up(height ÷ board face) rows in each section). Mesh and barbed wire: equal sections; rolls (fenced length ÷ roll for mesh, wires × fenced length ÷ roll for barbed wire); the length of all tension wire or barbed wire; braces: one at each end of a run (the start, the end and both sides of each gate), two at each corner and at each center post every braceEvery (Retissima, Moreda). Strainers counts the posts at the ends of runs, the corners and, on a wire fence, the braced center posts; strainerLength is the fence height plus strainerDepth. It also returns the concrete that sets the posts named by concretePosts (all, the strainers, or none), in liters for one line post (perPost) and one strainer post (perStrainer, at strainerDepth), the holes in concrete (concreted) and all concrete, and the bags of dry mix: for each hole its area (π ÷ 4 × diameter², or length × width) less the post (post × postDepth, or π ÷ 4 × post² as QUIKRETE counts a post), times the depth; a round hole is three times the post width and one third of the fence height deep unless given (QUIKRETE); bags by the yield of a bag from QUIKRETE's data sheets (1 cu ft = 28.3168 l), or of the given bagWeight and bagYield, with bagsWeight in kilograms.
Annotations the server declares
- readOnlyHint: true
- destructiveHint: false
- openWorldHint: false
- title: Fence calculator
calculate_floor_areaUse this when someone asks for the square footage, square meters or floor area of a room, a house or an apartment, including Wohnfläche and loi Carrez.No findings
Why it is in this group
- Nothing in its name or description says what it does, so it is counted as a write.
- The server marks it read-only (readOnlyHint: true), but an annotation never lowers a class.
Description, as the server wrote it Use this when someone asks for the square footage, square meters or floor area of a room, a house or an apartment, including Wohnfläche and loi Carrez. Adds up the floor area of rooms or parts of a floor, each a rectangle (length × width), a triangle (base × height ÷ 2) or a circle (by its diameter), and takes away parts marked to subtract, such as a closet or an opening to the floor below. Returns, in square meters, each part's own area and the area it adds, the floor area of all parts, and the total as the method counts it (1 m² = 10.7639 sq ft; 1 sq yd = 0.83613 m²). Methods: plain (the default; every part at its full area), woflv (Germany, Wohnflächenverordnung: clear height of 2 m or more in full, 1 m to under 2 m half, under 1 m not at all; unheated winter gardens half; balconies, loggias, roof gardens and terraces a quarter, the usual share; cellars, attics and garages not at all), carrez (France, loi Carrez: closed and covered space with a clear height of 1.80 m or more; balconies, terraces, cellars and garages not at all).
Annotations the server declares
- readOnlyHint: true
- destructiveHint: false
- openWorldHint: false
- title: Square footage calculator
calculate_flooringUse this when someone asks how much flooring, laminate, hardwood, vinyl or tile they need for a room, or how many boxes to buy.No findings
Why it is in this group
- Nothing in its name or description says what it does, so it is counted as a write.
- The server marks it read-only (readOnlyHint: true), but an annotation never lowers a class.
Description, as the server wrote it Use this when someone asks how much flooring, laminate, hardwood, vinyl or tile they need for a room, or how many boxes to buy. Calculates the planks, tiles or carpet for a floor, or tiles for a wall: the area from length × width or a given area, the area with waste for the laying pattern, the number of pieces (each tile counted with one grout joint added to its length and width), the boxes (from pieces per box, or the area per box) and the area in square yards. Waste when not given: straight 10 %, diagonal 15 %, herringbone 20 % (from Mullican Flooring's 5–7 % straight and 10–15 % diagonal and Havwoods' 15–20 % herringbone), carpet 10 %. Areas are in square meters (1 sq ft = 0.09290304 m²).
Annotations the server declares
- readOnlyHint: true
- destructiveHint: false
- openWorldHint: false
- title: Flooring and tile calculator
calculate_gravelUse this when someone asks how much gravel, crushed stone, sand, topsoil or mulch they need, in cubic yards, tons or bags.No findings
Why it is in this group
- Nothing in its name or description says what it does, so it is counted as a write.
- The server marks it read-only (readOnlyHint: true), but an annotation never lowers a class.
Description, as the server wrote it Use this when someone asks how much gravel, crushed stone, sand, topsoil or mulch they need, in cubic yards, tons or bags. Calculates the gravel, crushed stone, chippings, sand, topsoil or mulch that covers an area (a rectangle, a circle or a given area) to a depth: the area in square meters, the loose volume to order in liters, cubic feet and cubic yards (1 cu yd = 764.555 l), which is area × depth × (1 + compaction ÷ 100), the weight in kilograms and US short tons (907.18474 kg) from the loose density, and the bags of each given size that hold it, rounded up. Densities when not given, in kg per m³: gravel 1690, crushedStone 1600, sand 1690 (damp; dry loose sand is 1420) and topsoil 1250 (loam) from Caterpillar's table of loose material weights, chippings 1450 (Splitt, deutschland-rechner.de), mulch 281 (green wood chips, 473 lb per cu yd, EPA). Compaction: toom adds about 10 % for a crushed stone base, deutschland-rechner.de 6 % for base courses. byWeight tells whether merchants sell the material by weight: gravel, crushed stone, chippings and sand. bags holds the bag counts in the order of bagKilograms and then bagLiters. Common bags: 50 lb (0.5 cu ft) of gravel or sand in the US; 20 kg and 850 kg bulk bags in the UK; bulk bags of 500 and 1000 kg in Germany; mulch in 1.5 and 2 cu ft, or 50, 60 and 100 l.
Annotations the server declares
- readOnlyHint: true
- destructiveHint: false
- openWorldHint: false
- title: Gravel and mulch calculator
calculate_insulationUse this when someone asks how much insulation an attic, walls or a floor needs, which R-value, or how many batts or bags of blown-in insulation.No findings
Why it is in this group
- Nothing in its name or description says what it does, so it is counted as a write.
- The server marks it read-only (readOnlyHint: true), but an annotation never lowers a class.
Description, as the server wrote it Use this when someone asks how much insulation an attic, walls or a floor needs, which R-value, or how many batts or bags of blown-in insulation. Calculates the insulation for an attic, outside walls or a floor. The area is length × width, or for walls length × height less the doors (36 × 80 in) and windows (36 × 60 in) unless given. The target is the US R-value of the climate zone from the 2021 IECC Table R402.1.3, as ENERGY STAR repeats it: attic R-30 (zone 1), R-49 (2, 3), R-60 (4 to 8); floor R-13 (1, 2), R-19 (3, 4), R-30 (5 and 4C, 6), R-38 (7, 8); wall cavity R-13 (1, 2), R-20 (3), R-20 plus R-5 continuous insulation (4 to 8, returned as ci). In an attic the R-value to add is the target less the existing R-value. Batts (Owens Corning EcoTouch sizes and packages): the batt area is the area × batt width ÷ framing spacing, because batts fill only the bays between studs or joists; one layer for walls and floors, and in an attic as many layers as the R-value to add needs, the bottom one between the joists on a bare floor and the others over the whole floor; the result gives pieces and packages, rounded up. Blown-in (attic only): the chart row of the bag at or above the R-value to add, with the least installed thickness and the bags (area ÷ coverage a bag, rounded up); fiberglass is Owens Corning AttiCat (R-13 to R-60), cellulose Greenfiber Sanctuary (R-11 to R-60). It also returns the R-value when done and whether it reaches the target. Lengths are in millimeters, areas in square meters, R-values in US units (RSI = R × 0.1761102, NIST SP 811).
Annotations the server declares
- readOnlyHint: true
- destructiveHint: false
- openWorldHint: false
- title: Insulation calculator
calculate_paintUse this when someone asks how much paint they need for a room, walls or a ceiling.No findings
Why it is in this group
- Nothing in its name or description says what it does, so it is counted as a write.
- The server marks it read-only (readOnlyHint: true), but an annotation never lowers a class.
Description, as the server wrote it Use this when someone asks how much paint they need for a room, walls or a ceiling. Calculates the paint for a room: the wall area 2 × (length + width) × height, or a given wall area, less the doors and windows (36 × 80 in and 36 × 60 in each unless given), plus the ceiling (length × width) when asked, times the coats, divided by the coverage. Returns the areas in square meters and the paint in liters, in all and for walls and ceiling (1 US gallon = 3.785411784 l). Coverage when not given: 350 sq ft per gallon (8.59 m² per liter), the low end of Sherwin-Williams' 350–400; the can label is more exact.
Annotations the server declares
- readOnlyHint: true
- destructiveHint: false
- openWorldHint: false
- title: Paint calculator
calculate_paversUse this when someone plans a patio, walkway or driveway of pavers and asks how many pavers, how much base gravel or sand they need.No findings
Why it is in this group
- Nothing in its name or description says what it does, so it is counted as a write.
- The server marks it read-only (readOnlyHint: true), but an annotation never lowers a class.
Description, as the server wrote it Use this when someone plans a patio, walkway or driveway of pavers and asks how many pavers, how much base gravel or sand they need. Calculates the pavers for a patio, a walk or a driveway (a rectangle, a circle or a given area): the area in square meters, the waste in percent and the area with waste, pavers per square meter with their joints, and the pavers to buy, rounded up. Waste when not given: 5 % for running bond, stack bond and herringbone at 90° in a rectangle, 10 % for herringbone at 45° and a round area (Western Interlock: 5 to 10 %). It also gives the edge restraint in millimeters (the perimeter less the edge a wall or a curb holds) with its spikes, one every 609.6 mm for a patio and every 304.8 mm for a driveway (Snap Edge); the compacted base depth, by default the CMHA PAV-TEC-002 minimum on well-drained soil of 101.6 mm for patios and walks and 152.4 mm for driveways; and the bedding sand depth, 25.4 mm. base and sand are results of the gravel calculation (area, volume in liters, cubic feet and cubic yards, density, weight in kilograms and US short tons, bags by size): the base is loose crushed stone (1600 kg/m³) under the paved area widened past each restrained edge by 152.4 mm (Snap Edge) or the base depth where that is more (CMHA PAV-TEC-003 extends the base past the restraint by its thickness), with 36 % added for compaction (Wisconsin DOT report 0092-22-05 measured 36 to 47 %); the sand is damp loose sand (1690 kg/m³) under the paved area. edge and spikes are absent for a given area without a perimeter.
Annotations the server declares
- readOnlyHint: true
- destructiveHint: false
- openWorldHint: false
- title: Paver calculator
calculate_plan_scaleUse this when someone reads or prints a scale drawing or floor plan and asks what a measurement on paper means in real life, or which scale or sheet size to use.No findings
Why it is in this group
- Nothing in its name or description says what it does, so it is counted as a write.
- The server marks it read-only (readOnlyHint: true), but an annotation never lowers a class.
Description, as the server wrote it Use this when someone reads or prints a scale drawing or floor plan and asks what a measurement on paper means in real life, or which scale or sheet size to use. Converts lengths on a scale drawing. With a scale 1:N and a length on paper it gives the real length; with a scale and a real length it gives the length on paper; with a length on paper and the real length it shows, and no scale, it finds N. It also gives the nearest common scale in each system, metric (ISO 5455, 1:5 to 1:2500), US architectural (3" = 1'-0" to 1/32" = 1'-0", N = 12 ÷ inches per foot) and US engineering (1" = 10'-0" to 1" = 100'-0", N = 12 × feet per inch), with the difference as a fraction. For a plan size it gives the plan's size on paper and the smallest ISO sheet (A4 to A0) and US sheet (Letter, ARCH A, Tabloid, ARCH B to ARCH E) that holds it inside the margins, upright or turned.
Annotations the server declares
- readOnlyHint: true
- destructiveHint: false
- openWorldHint: false
- title: Floor plan scale calculator
calculate_pool_volumeUse this when someone asks how many gallons or liters of water a swimming pool holds.No findings
Why it is in this group
- Nothing in its name or description says what it does, so it is counted as a write.
- The server marks it read-only (readOnlyHint: true), but an annotation never lowers a class.
Description, as the server wrote it Use this when someone asks how many gallons or liters of water a swimming pool holds. Calculates the water in a swimming pool: the water surface in square meters, the average depth, liters and US gallons. Shapes: rectangle (length, width), round (diameter), oval with straight sides and half-circle ends (length, width), ellipse (length, width), and kidney (length, width across the larger round end, narrowWidth across the smaller one; area 0.45 × (A + B) × length, an approximation used in the pool trade). Give depth for a flat floor, or shallow and deep for a floor that slopes from one end to the other; the average depth is their mean.
Annotations the server declares
- readOnlyHint: true
- destructiveHint: false
- openWorldHint: false
- title: Pool volume calculator
calculate_rampUse this when someone plans a wheelchair ramp or an accessible ramp and asks how long it must be or whether it meets the ADA or a building rule.No findings
Why it is in this group
- Nothing in its name or description says what it does, so it is counted as a write.
- The server marks it read-only (readOnlyHint: true), but an annotation never lowers a class.
Description, as the server wrote it Use this when someone plans a wheelchair ramp or an accessible ramp and asks how long it must be or whether it meets the ADA or a building rule. Calculates a ramp that climbs a height in equal runs with level landings: the slope, the number and length of the runs, the landings, the length with landings and the floor space, straight or as a switchback, checked against a ramp rule. Without a slope, it finds the shortest ramp the rule allows. Rules: ada2010 (United States, 2010 ADA Standards), admHomes (England, Approved Document M, M4(2) dwellings), admBuildings (England, Approved Document M, other buildings), din18040 (Germany), cte (Spain, CTE DB-SUA accessible route).
Annotations the server declares
- readOnlyHint: true
- destructiveHint: false
- openWorldHint: false
- title: Ramp calculator
calculate_roof_pitchUse this when someone asks for a roof pitch in degrees, percent or rise per 12, a rafter length, a ridge height or a roof area.No findings
Why it is in this group
- Nothing in its name or description says what it does, so it is counted as a write.
- The server marks it read-only (readOnlyHint: true), but an annotation never lowers a class.
Description, as the server wrote it Use this when someone asks for a roof pitch in degrees, percent or rise per 12, a rafter length, a ridge height or a roof area. Converts a roof pitch given as rise per 12, degrees, percent or a rise over a run into the other forms and the roof multiplier (length along the slope per unit of level run). With the building's width, it gives the ridge height above the walls and the rafter length with the overhang of a gable or shed roof; with the length too, the area on plan with the overhangs and the roof area in square meters.
Annotations the server declares
- readOnlyHint: true
- destructiveHint: false
- openWorldHint: false
- title: Roof pitch calculator
calculate_roofingUse this when someone asks how many squares or bundles of shingles, underlayment rolls or roofing nails a roof needs.No findings
Why it is in this group
- Nothing in its name or description says what it does, so it is counted as a write.
- The server marks it read-only (readOnlyHint: true), but an annotation never lowers a class.
Description, as the server wrote it Use this when someone asks how many squares or bundles of shingles, underlayment rolls or roofing nails a roof needs. Calculates asphalt shingle roofing for a gable, hip or shed roof over a rectangular building, or for a roof surface given by its area. Roof area: the plan with overhangs, (length + 2 × rake overhang) × (width + 2 × eaves overhang), times the slope factor √(1 + (rise/run)²); a hip roof has the eaves overhang all around and the same area as a gable roof of the same pitch. It returns the area, the area with waste (10 % gable and shed, 15 % hip unless given; GAF adds 10 %, Owens Corning and IKO 10 to 15 %), squares of 100 sq ft, bundles (33.33 sq ft each unless given, GAF), underlayment rolls (synthetic 10 squares, No. 15 felt 4, No. 30 felt 2; two layers below 4/12, IRC R905.2), the starter strip for the eaves and rakes (120 ft a bundle, GAF Pro-Start), the ridge and hip cap (ridge = longer side − shorter side on a hip roof; hips √(rafter² + run²) each; 25 ft a bundle, GAF Seal-A-Ridge), the drip edge for eaves and rakes in 10 ft pieces lapped 2 in (IRC R905.2.8.5), nails (320 a square with 4 nails a shingle, 480 with 6, Owens Corning), and whether the pitch reaches the 2/12 least for shingles (IRC R905.2). Give in12 or degrees. Lengths are in millimeters and areas in square meters (1 sq ft = 0.09290304 m²).
Annotations the server declares
- readOnlyHint: true
- destructiveHint: false
- openWorldHint: false
- title: Roofing calculator
calculate_rug_sizeUse this when someone asks what size of rug to buy for a living room, bedroom or dining room.No findings
Why it is in this group
- Nothing in its name or description says what it does, so it is counted as a write.
- The server marks it read-only (readOnlyHint: true), but an annotation never lowers a class.
Description, as the server wrote it Use this when someone asks what size of rug to buy for a living room, bedroom or dining room. Calculates the rug for a living room (sofa or L-shaped sectional with seats across, all legs on, front legs on or floating), a bed (US or European size, under the lower two thirds or the whole bed) or a dining table (rectangle, square or round), and rounds it to the nearest standard sizes sold in the US (feet: 3 × 5 to 12 × 15, rounds and squares 3 to 10 ft) and in Europe (cm: 60 × 90 to 300 × 400, rounds and squares 80 to 300). Returns the rug area with its position relative to the furniture, the US and European sizes oriented to it (undefined when no standard size fits), and with a room size the largest rugs that keep bare floor to the walls. Margins: sofa 12 in or 30 cm, bed 24 in or 50 cm, dining table 24 in or 60 cm, walls 18 in or 25 cm.
Annotations the server declares
- readOnlyHint: true
- destructiveHint: false
- openWorldHint: false
- title: Rug size calculator
calculate_sofa_sizeUse this when someone asks what size of sofa or sectional fits a living room.No findings
Why it is in this group
- Nothing in its name or description says what it does, so it is counted as a write.
- The server marks it read-only (readOnlyHint: true), but an annotation never lowers a class.
Description, as the server wrote it Use this when someone asks what size of sofa or sectional fits a living room. Calculates the longest sofa or L sectional for a wall, with 36 in walkways past its ends (NKBA) and 22 in end tables beside it: its length (up to 110 in for a sofa, 156 × 120 in for an L), the number of seats (22 in each after 3 in arms), the sofa depths the room allows in front of a coffee table and a TV unit, the coffee table (two thirds of the sofa, 12 to 18 in from it), the viewing distance to the TV, the TV size that fills 30° to 40° of the view (SMPTE), and, for a given TV, the best distance and whether the seat lies within it.
Annotations the server declares
- readOnlyHint: true
- destructiveHint: false
- openWorldHint: false
- title: Sofa size calculator
calculate_stairsUse this when someone asks how many stairs or steps they need, how to build or size a staircase, a stair's rise and run, stringer length or stairwell opening, or whether a stair me…No findings
Why it is in this group
- Nothing in its name or description says what it does, so it is counted as a write.
- The server marks it read-only (readOnlyHint: true), but an annotation never lowers a class.
Description, as the server wrote it Use this when someone asks how many stairs or steps they need, how to build or size a staircase, a stair's rise and run, stringer length or stairwell opening, or whether a stair meets code. Calculates a stair that climbs a floor-to-floor height in equal steps: the number of risers, riser height, tread depth, total run, pitch, stringer length, stairwell opening and floor space, straight or with an L or U landing, checked against a stair rule. Rules: irc2021 (United States), ukPartK (England), din18065 (Germany), cte (Spain), dm236 (Italy), nbr9050 (Brazil), blondel (the comfort rule used in France).
Annotations the server declares
- readOnlyHint: true
- destructiveHint: false
- openWorldHint: false
- title: Stair calculator
calculate_wall_framingUse this when someone plans a stud wall and asks how many studs, plates or headers they need.No findings
Why it is in this group
- Nothing in its name or description says what it does, so it is counted as a write.
- The server marks it read-only (readOnlyHint: true), but an annotation never lowers a class.
Description, as the server wrote it Use this when someone plans a stud wall and asks how many studs, plates or headers they need. Lays out one straight wood stud wall and counts its lumber: the stud length (height less the bottom plate and the top plates), a stud at each end and studs on centers measured from the left end, an extra stud beside the end stud at each corner, two studs at each meeting wall, and for each door and window king studs (exterior walls: IRC Table R602.7.5, 1 up to a 4 ft span, 2 up to 8 ft, 3 up to 14 ft, 4 up to 18 ft; interior walls: 1), jack studs, a header and cripples on the layout above it (none above a flat header with 24 in or less to the top plate, IRC R602.7.4); windows also get a flat sill and cripples under it. Doors, windows and meeting walls are spread evenly along the wall, doors and windows in turn. It returns the counts of each kind, the pieces to cut (jacks, cripples, header boards and sills with their lengths), the studs (full-height studs plus the studs the jacks and cripples are cut from), the studs to buy with spares (10 % unless given), the plates in millimeters (the length once for the bottom plate and once for each top plate, plus the sills and a flat header) and the boards of the given length, the wall and rough-opening areas in square meters, the sheets for one face less the openings without waste, and every piece with its place in the wall from the lower left corner. Lumber sizes follow PS 20 (1 1/2 in thick; 2×8 7 1/4 in deep). It does not size headers or jack studs; IRC Table R602.7(1) does for exterior bearing walls.
Annotations the server declares
- readOnlyHint: true
- destructiveHint: false
- openWorldHint: false
- title: Wall framing calculator
calculate_wallpaperUse this when someone asks how many rolls of wallpaper they need.No findings
Why it is in this group
- Nothing in its name or description says what it does, so it is counted as a write.
- The server marks it read-only (readOnlyHint: true), but an annotation never lowers a class.
Description, as the server wrote it Use this when someone asks how many rolls of wallpaper they need. Calculates the wallpaper for walls: the cut length of each drop (wall height + 4 in for trimming, rounded up to whole pattern repeats, plus half a repeat for a drop match), the drops per roll, the drops across the walls (their width less the doors' and windows' area divided by the height, over the roll width), the rolls, and the wall area in square meters. Rolls: usDouble (US double roll, 20.5 in × 33 ft, as York makes it), euro (0.53 × 10.05 m, as Rasch makes it); rollWidth and rollLength replace them. The rolls do not include the spare roll from the same batch that makers advise.
Annotations the server declares
- readOnlyHint: true
- destructiveHint: false
- openWorldHint: false
- title: Wallpaper calculator
calculate_window_sizeUse this when someone asks how big the windows of a room must be for daylight, ventilation or an egress window under building code.No findings
Why it is in this group
- Nothing in its name or description says what it does, so it is counted as a write.
- The server marks it read-only (readOnlyHint: true), but an annotation never lowers a class.
Description, as the server wrote it Use this when someone asks how big the windows of a room must be for daylight, ventilation or an egress window under building code. Calculates the window area a room needs for daylight and fresh air from its floor area, under a building rule: the smallest glass or window-opening area, the smallest area that opens, and the smallest total window size with frame for the window type and frame share. It gives the rule's emergency escape (egress) opening, and checks windows and an escape opening when they are given. Areas are in square meters. Rules: irc2021 (United States, R303.1 and R310), england (Approved Documents F and B), mbo (Germany: Musterbauordnung, NRW, Brandenburg), baybo (Bavaria), dm1975 (Italy), catalonia (Spain, Catalonia), portoAlegre (Brazil, Porto Alegre).
Annotations the server declares
- readOnlyHint: true
- destructiveHint: false
- openWorldHint: false
- title: Window size calculator
create_projectUse this when someone asks to design, draw or plan a house, home, apartment, cabin, tiny house, extension, office, room, kitchen, bathroom or garden, wants a floor plan, a house pl…No findings
Why it is in this group
- The name "create_project" says "create": a word for a change.
Description, as the server wrote it Use this when someone asks to design, draw or plan a house, home, apartment, cabin, tiny house, extension, office, room, kitchen, bathroom or garden, wants a floor plan, a house plan, a room layout or a 3D model of a home, and no plan of theirs fits. Starts a new empty plan to scale in their account and returns its ID. Build it with edit_project and show it with open_editor.
Annotations the server declares
- readOnlyHint: false
- destructiveHint: false
- idempotentHint: false
- openWorldHint: false
- title: Create plan
edit_projectUse this to build or change a plan: walls, rooms, doors, windows, stairs, roofs, furniture, finishes, the garden and the site.1 finding
Why it is in this group
- The name "edit_project" says "edit": a word for a change.
- The input takes a statement or command to run (input.script), which can change anything it can reach.
Findings
- Info
The description is 14,288 characters long, over the 2,000 this check looks for.
What this check looks forMatched text
description ends: "...es an optional field plan.remove(id) → deletes the element and the openings in it"
Description, as the server wrote it Use this to build or change a plan: walls, rooms, doors, windows, stairs, roofs, furniture, finishes, the garden and the site. Changes a plan with a short script of plan operations, which the person's open editors show at once. Returns the IDs that changed, the warnings and a description of every floor. A change is never final: undo_change takes it back and restores what it removed, for the last 50 changes. JavaScript that changes the plan through the global object plan, run as one transaction: when any call fails, nothing changes and the error names the line. return a value to see it in the result. There is no network, clock or randomness. Points are [x, y] in millimeters. Floors count from 0 at the bottom. Furniture items are keys from plan.search or search_furniture. Lamps (search "lighting" or "outdoor lighting") light the 3D view: plan.against puts a wall lamp on a wall, ceiling lamps hang from the ceiling, and plan.set(id, {lumens, kelvin, on}) sets a lamp's output, its color temperature and whether it is on. The calls that build the house; the script field lists the calls for the site, the garden and the details: plan.brief() → the answers the person gave when starting the project, or null: {floors, bedrooms, bathrooms, area (living area in m²), kitchen (open or separate), office, roof, plot ([width along the street, depth] in mm), street (the compass side the street runs along), site (flat, slope or water), slope (percent), downhill (the compass side the ground falls toward, where water lies), patio, pool, beds, fence, parking (garage or carport, when they want one), basement, roofTerrace, porch (a covered porch across the street face), cladding (render, siding or wood for the outside walls, brick when absent), notes (wishes in their own words)} plan.floors() → [{floor, name, height}] plan.elements(floor) → elements in the file shape plan.get(id) → the element in the file shape, with its floor plan.describe(floor) → rooms with areas and sizes, what each door connects, window directions, routes and warnings plan.warnings() → warnings on every floor plan.check(rules) → [{floor, ids, message}]: the plan checked against a rule set beyond the layout warnings, each warning naming its part of the rules: "din18040-2" (DIN 18040-2, barrier-free dwellings without the wheelchair requirements: door widths and heights without thresholds, bathroom doors that open outward, hallways 1200 wide, 1200 × 1200 free in every room and in front of toilets, basins and showers, 1200 in front of kitchen fittings and 900 in front of cupboards, 1200 along one long side of a bed and 900 along the other, level showers 1200 × 1200, a window sill of 600 or lower in living rooms and bedrooms, straight stairs with handrails on both sides) or "irc2021" (IRC 2021 in part: room areas, widths and ceiling heights, glazing, emergency escape openings from sleeping rooms, the egress door, hallway widths, stair widths, risers, treads, headroom and handrails, spiral stairs, and guards). Rooms are known by their names, such as bedroom, bathroom, kitchen and hall plan.search(words) → catalog items {item, name, category, width, length, height} plan.addFloor(name, height?) → the new top floor's index plan.setFloor(floor, {name?, height?}) plan.wall(floor, from, to, {thickness?, height?, material?, curve?}) → wall id; curve bends the wall into an arc whose middle lies that far from the straight line, to the left of from → to (negative bends it right), at most the wall's length. material Glass makes a wall of glass in a slim metal frame with a mullion at least every 3000, for meeting rooms and offices or a glazed facade plan.walls(floor, points, {closed?, thickness?, height?, material?, curve?}) → wall ids, joined at every corner; curve bends every wall alike plan.circle(floor, center, radius, {thickness?, height?, material?}) → wall ids: four curved walls that close a round room or tower, radius to their centerline; doors and windows fit on them like on straight walls plan.room(floor, name, min, max, {thickness?, floorFinish?, floorColor?, wallFinish?, wallColor?, storeys?}) → {room, walls}: a room of its own with four walls around the inside corners min and max plan.marker(floor, name, at, {floorFinish?, floorColor?, wallFinish?, wallColor?, storeys?}) → room id: names the walled area around at. storeys (1) makes a room two or more storeys high, such as a great room or an entrance hall open to the floor above: the floors above leave its area open as a void, so give the floor above walls or a railing along the void's edge plan.door(wall, offset, {kind?, width?, height?, elevation?, hingeAtEnd?, opensOutward?, head?, open?}) → door id; offset is from the wall's from point to the door's center. kind is standard, glass (a glass leaf in a metal frame, as for a meeting room in a glass partition, where a standard door also has a glass leaf), sliding, pocket, barn, bifold, garage (a sectional garage door, 2500 wide) or open. open is how far a standard or glass door's leaf stands open, up to 180 degrees, or a bifold door's panels fold, up to 90, and how far a sliding, pocket or barn door slides open or a garage door rolls up, in percent of its travel up to 100, as the 3D view and renders show it. head is flat (the default), round, segment or pointed for an arched top, whose crown is at the height; on a curved wall the door follows the curve. plan.set(id, {frameColor}) colors its frame, lining and casings in a #rrggbb color, as for black steel doors plan.window(wall, offset, {kind?, width?, height?, elevation?, hingeAtEnd?, opensOutward?, head?, open?}) → window id; elevation is the sill height, head an arched top as for a door, and open how far its sashes stand open, up to 90 degrees. plan.set(id, {frameColor}) colors its frame and sashes in a #rrggbb color, as for black steel windows plan.furniture(floor, item, at, rotation?) → id; rotation in degrees counterclockwise, and at 0 the item's back, or a bed's head, faces +y. An item that… [8288 more characters not shown]
Annotations the server declares
- readOnlyHint: false
- destructiveHint: false
- idempotentHint: false
- openWorldHint: false
- title: Edit plan
open_editorUse this when the person wants to see, open or change a plan by hand, or wants to watch you build it, and no editor shows that plan yet.1 finding
Why it is in this group
- The name "open_editor" says "open": a word for a change.
- The server marks it read-only (readOnlyHint: true), but an annotation never lowers a class.
Findings
- Warn
The server marks "open_editor" read-only (readOnlyHint: true), and its own name, description or input give the class "write".
What this check looks forMatched text
annotations: {"readOnlyHint":true,"destructiveHint":false,"openWorldHint":false}; The name "open_editor" says "open": a word for a change.
Description, as the server wrote it Use this when the person wants to see, open or change a plan by hand, or wants to watch you build it, and no editor shows that plan yet. Shows a plan in the Simple House Planner editor, where the person can change it by hand in 2D and 3D and sees your changes as you make them. Without a project ID it shows their plans to choose from. Each call opens another editor, and an open editor follows every change by itself.
Annotations the server declares
- readOnlyHint: true
- destructiveHint: false
- openWorldHint: false
- title: Simple House Planner
query_projectUse this to check a plan against building rules, such as accessibility or US code, or for questions that describe_plan does not answer.1 finding
Why it is in this group
- The name "query_project" says "query": a word for reading.
- The input takes a statement or command to run (input.script), which can change anything it can reach.
- The server marks it read-only (readOnlyHint: true), but an annotation never lowers a class.
Findings
- Warn
The server marks "query_project" read-only (readOnlyHint: true), and its own name, description or input give the class "write".
What this check looks forMatched text
annotations: {"readOnlyHint":true,"destructiveHint":false,"openWorldHint":false}; The name "query_project" says "query": a word for reading.
Description, as the server wrote it Use this to check a plan against building rules, such as accessibility or US code, or for questions that describe_plan does not answer. Runs a read-only script and returns what it returns. Scripts work as in edit_project, but only plan.floors, plan.elements, plan.get, plan.describe, plan.warnings, plan.check and plan.search are available; plan.check("din18040-2") or plan.check("irc2021") checks the plan against DIN 18040-2 for barrier-free dwellings or the 2021 IRC.
Annotations the server declares
- readOnlyHint: true
- destructiveHint: false
- openWorldHint: false
- title: Query plan
redo_changeUse this when the person asks to redo a change you undid.No findings
Why it is in this group
- Nothing in its name or description says what it does, so it is counted as a write.
Description, as the server wrote it Use this when the person asks to redo a change you undid. Makes again your own last change to a plan. The person's own edits stay as they are.
Annotations the server declares
- readOnlyHint: false
- destructiveHint: false
- idempotentHint: false
- openWorldHint: false
- title: Redo change
rename_projectUse this when the person asks to rename one of their plans.No findings
Why it is in this group
- The name "rename_project" says "rename": a word for a change.
Description, as the server wrote it Use this when the person asks to rename one of their plans. Changes the name of a plan in the person's account.
Annotations the server declares
- readOnlyHint: false
- destructiveHint: false
- idempotentHint: true
- openWorldHint: false
- title: Rename plan
undo_changeUse this when the person asks to undo or take back your last change.No findings
Why it is in this group
- Nothing in its name or description says what it does, so it is counted as a write.
Description, as the server wrote it Use this when the person asks to undo or take back your last change. Takes back your own last change to a plan. The person's own edits stay as they are.
Annotations the server declares
- readOnlyHint: false
- destructiveHint: false
- idempotentHint: false
- openWorldHint: false
- title: Undo change
Only reads 3Show 3 read-only tools
describe_planUse this before you talk about or change a plan, and when the person asks about its rooms, sizes, areas or square footage.No findings
Why it is in this group
- The name "describe_plan" says "describe": a word for reading.
Description, as the server wrote it Use this before you talk about or change a plan, and when the person asks about its rooms, sizes, areas or square footage. Returns the facts that the planner computes for the site and for a floor or every floor: the site's location, time zone and north, rooms with areas and sizes, what each door connects, window directions, routes from the entrance, and warnings.
Annotations the server declares
- readOnlyHint: true
- destructiveHint: false
- openWorldHint: false
- title: Describe plan
list_projectsUse this when someone mentions one of their plans or asks what plans they have.Reads text others writeNo findings
Why it is in this group
- The name "list_projects" says "list": a word for reading.
What it can reach
- untrusted-inputThe description's first sentence says "mention": it reads comments, which other people can write.
Description, as the server wrote it Use this when someone mentions one of their plans or asks what plans they have. Lists the plans in their account with titles, floors and last changes, newest first.
Annotations the server declares
- readOnlyHint: true
- destructiveHint: false
- openWorldHint: false
- title: List plans
search_furnitureUse this before you place furniture, fixtures, plants, cars or lights in a plan.No findings
Why it is in this group
- The name "search_furniture" says "search": a word for reading.
Description, as the server wrote it Use this before you place furniture, fixtures, plants, cars or lights in a plan. Finds items in the catalog by words such as bed, sofa or table, and by size such as w:1200. Use the item keys with plan.furniture and plan.against.
Annotations the server declares
- readOnlyHint: true
- destructiveHint: false
- openWorldHint: false
- title: Search furniture
This is not a safety rating, and no finding is not a safety guarantee. The groups and findings come from fixed checks of the tool definitions the server returned on the date shown, not from its code or what it does when called. How the checks work.
Exfil surface
Which tools read private data, which read text someone else can write, and which can send data out. One of each is a path a prompt injection can use.
No private-data, untrusted-input, outbound path in this server alone: no tool is tagged private-data or outbound.
- Reads private data0
- Reads files, mail, messages, databases, secrets, calendars or repositories.
- Reads text others write1
- Brings in text someone else can write: web pages, inbound email, messages, issues and comments.
- Can send data out0
- Can carry data to people or systems: it sends, posts or publishes, or takes a recipient, channel or URL.
Other servers in the same agent add their own tools to these paths. Audit your whole setup to see them together.
Remote posture
What anyone on the internet sees at the remote endpoint: an anonymous initialize and tools/list, and the public OAuth metadata.
Looked at Nov 20, 2026, 18:22 UTC, unchanged since Nov 20, 2026. No credentials were sent and no tool was called. What is looked at.
- Reachable
- yes
- HTTP status of an anonymous initialize
- 200
- tools/list served without credentials
- yes
- Tools that change things, listed without credentials
- 34
- Protocol version
- 2025-06-18
- WWW-Authenticate on 401
- not observed
- resource_metadata in WWW-Authenticate
- not observed
- RFC 9728 protected resource metadata
- https://simplehouseplanner.com/.well-known/oauth-protected-resource/mcp
- Authorization servers
- https://simplehouseplanner.com/api/auth
- Legacy HTTP+SSE transport
- no
- Dynamic client registration
- yes
- Client ID metadata documents
- yes
- HighThe whole server
The endpoint served tools/list without credentials, and the list has 34 tools that change things (1 destructive, 33 write). Whether a call also works without credentials was not tested: tools are never called.
What this check looks forMatched text
https://simplehouseplanner.com/mcp: tools/list returned 37 tools to an anonymous client, including delete_project (destructive), calculate_stairs (write), calculate_floor_area (write), calculate_pool_volume (write), calculate_plan_scale (write) and 29 more
Posture changes
- Nov 20, 2026
- Tools that change things, listed without credentials: 9 to 34
Findings
Matches of fixed checks, with the text they matched.
- Warnquery_project
The server marks "query_project" read-only (readOnlyHint: true), and its own name, description or input give the class "write".
What this check looks forMatched text
annotations: {"readOnlyHint":true,"destructiveHint":false,"openWorldHint":false}; The name "query_project" says "query": a word for reading.
- Warnopen_editor
The server marks "open_editor" read-only (readOnlyHint: true), and its own name, description or input give the class "write".
What this check looks forMatched text
annotations: {"readOnlyHint":true,"destructiveHint":false,"openWorldHint":false}; The name "open_editor" says "open": a word for a change.
- Infocalculate_fence
The description is 2,069 characters long, over the 2,000 this check looks for.
What this check looks forMatched text
description ends: "...28.3168 l), or of the given bagWeight and bagYield, with bagsWeight in kilograms."
- Infoedit_project
The description is 14,288 characters long, over the 2,000 this check looks for.
What this check looks forMatched text
description ends: "...es an optional field plan.remove(id) → deletes the element and the openings in it"
History
Changes to its tool definitions and to its remote endpoint, newest first.
PostureRemote posture changed. Tools that change things, listed without credentials: 9 -> 34.View diff
- Tools that change things, listed without credentials: 9 to 34
Tools25 added, 12 changed.+25 added~12 changedView diff
- Added:calculate_bed_fitChanges things
- Added:calculate_bricksChanges things
- Added:calculate_btuChanges things
- Added:calculate_concreteChanges things
- Added:calculate_deckChanges things
- Added:calculate_dining_tableChanges things
- Added:calculate_drywallChanges things
- Added:calculate_fenceChanges things
- Added:calculate_floor_areaChanges things
- Added:calculate_flooringChanges things
- Added:calculate_gravelChanges things
- Added:calculate_insulationChanges things
- Added:calculate_paintChanges things
- Added:calculate_paversChanges things
- Added:calculate_plan_scaleChanges things
- Added:calculate_pool_volumeChanges things
- Added:calculate_rampChanges things
- Added:calculate_roof_pitchChanges things
- Added:calculate_roofingChanges things
- Added:calculate_rug_sizeChanges things
- Added:calculate_sofa_sizeChanges things
- Added:calculate_stairsChanges things
- Added:calculate_wall_framingChanges things
- Added:calculate_wallpaperChanges things
- Added:calculate_window_sizeChanges things
- Changed:account_profileChanges thingsannotations
- Changed:create_projectChanges thingsdescriptionannotations
- Changed:delete_projectDeletes or cancelsdescriptioninputSchemaannotations
- Changed:describe_planOnly readsdescriptioninputSchemaannotations
- Changed:edit_projectChanges thingsdescriptioninputSchemaannotations
- Changed:list_projectsOnly readsannotations
- Changed:open_editorChanges thingsdescriptioninputSchemaannotations
- Changed:query_projectChanges thingsdescriptioninputSchemaannotations
- Changed:redo_changeChanges thingsdescriptioninputSchemaannotations
- Changed:rename_projectChanges thingsdescriptioninputSchemaannotations
- Changed:search_furnitureOnly readsdescriptioninputSchemaannotations
- Changed:undo_changeChanges thingsdescriptioninputSchemaannotations
Install
Pinned to version 2.0.0. Values in angle brackets are yours to fill in.
claude mcp add --transport http floor-plans https://simplehouseplanner.com/mcpclaude mcp add --transport http floor-plans https://simplehouseplanner.com/mcpRun in a terminal.
Claude Code permissions
Allow the reads, ask before a change or a way out, deny the deletes. Paste into .claude/settings.json.
{
"permissions": {
"allow": [
"mcp__floor-plans__search_furniture",
"mcp__floor-plans__list_projects",
"mcp__floor-plans__describe_plan"
],
"ask": [
"mcp__floor-plans__calculate_stairs",
"mcp__floor-plans__calculate_floor_area",
"mcp__floor-plans__calculate_pool_volume",
"mcp__floor-plans__calculate_plan_scale",
"mcp__floor-plans__calculate_roof_pitch",
"mcp__floor-plans__calculate_ramp",
"mcp__floor-plans__calculate_window_size",
"mcp__floor-plans__calculate_bed_fit",
"mcp__floor-plans__calculate_sofa_size",
"mcp__floor-plans__calculate_dining_table",
"mcp__floor-plans__calculate_rug_size",
"mcp__floor-plans__calculate_flooring",
"mcp__floor-plans__calculate_paint",
"mcp__floor-plans__calculate_wallpaper",
"mcp__floor-plans__calculate_deck",
"mcp__floor-plans__calculate_fence",
"mcp__floor-plans__calculate_drywall",
"mcp__floor-plans__calculate_concrete",
"mcp__floor-plans__calculate_gravel",
"mcp__floor-plans__calculate_roofing",
"mcp__floor-plans__calculate_insulation",
"mcp__floor-plans__calculate_pavers",
"mcp__floor-plans__calculate_bricks",
"mcp__floor-plans__calculate_wall_framing",
"mcp__floor-plans__calculate_btu",
"mcp__floor-plans__create_project",
"mcp__floor-plans__rename_project",
"mcp__floor-plans__query_project",
"mcp__floor-plans__edit_project",
"mcp__floor-plans__undo_change",
"mcp__floor-plans__redo_change",
"mcp__floor-plans__open_editor",
"mcp__floor-plans__account_profile"
],
"deny": [
"mcp__floor-plans__delete_project"
]
}
}Tools that only read are allowed, tools that change things ask first, tools that delete or cancel are denied. A read that can send data out (it takes a URL, say) asks first too. It assumes the server is installed as floor-plans. Review it before you use it.
Capability tags behind 1 rule
- mcp__floor-plans__list_projects untrusted-input
Pin
Keep the decision: fail CI when the tools change, follow every change, or show a badge.
Pin in CI
Fail a build when the tools you reviewed are not the tools the server serves today.
curl -s "https://radar.anlyon.com/api/v1/servers/com.simplehouseplanner/floor-plans/verify?hash=b2ae6d8bfb9ac209fafdd99b330b6943e57baea85e24ceaec27b6521d2774507" | jq -e '.changed == false'Pinned hash b2ae6d8bfb9a, from Nov 19, 2026, 11:18 UTC.
Watch
Get told when its tools change: a new tool, a new description, a new class.
https://radar.anlyon.com/servers/com.simplehouseplanner/floor-plans/changes.xmlAn Atom feed. Works in any feed reader or Slack's RSS app.
Badge
[](https://radar.anlyon.com/servers/com.simplehouseplanner/floor-plans)Source: MCP Registry. Synced Nov 5, 2026, 14:17 UTC.
Simple House Planner MCP server: questions and answers
Answered from the scan above, not from the publisher's description.
Is the Simple House Planner MCP server safe?
- No scan can promise that. What its definitions show: 37 tools, 34 of which can change, send or delete something, and 4 findings from fixed checks. Allow the reads, ask before each change, and deny the deletes; the permissions block on this page does that.
Can the Simple House Planner MCP server delete data?
- Yes. 1 tool can delete, cancel or revoke something: delete_project.
Can the Simple House Planner MCP server do things that cannot be undone?
- No tool is classed as irreversible: none of them sends, pays, publishes or merges, going by their definitions.
What tools does the Simple House Planner MCP server have?
- 37 tools: 1 destructive, 33 write, 3 read. delete_project, calculate_stairs, calculate_floor_area, calculate_pool_volume, calculate_plan_scale, calculate_roof_pitch, calculate_ramp, calculate_window_size and 29 more.
Does the Simple House Planner MCP server need sign-in or OAuth?
- Its remote endpoint listed its tools to an anonymous client, without sign-in.
Does the Simple House Planner MCP server send data to outside services?
- None of its tools sends, posts or publishes, or takes a recipient, channel or URL.
Has the Simple House Planner MCP server changed its tools?
- Yes, once since Anlyon Radar started tracking it, most recently on Nov 19, 2026. Every change is on this page and in its Atom feed.