Skip to content

Mariner GPS Tools MCP server

com.watchandnavy/mariner-gps-toolswatchandnavy.comstreamable-httpv1.0.1Scanned

Marine navigation calculators for GPS distance, bearing, cross track error, coordinates and speed.

6 tools: 3 do something that can't be undone, 2 change things and 1 only read.

Tools: 0 delete, 3 irreversible, 2 write, 1 read.
  • Reads private data · 0
  • Reads text others write · 0
  • Can send data out · 3
  • No findings

Tools listed without sign-in. Remote posture

With Anlyon

3 tools here do something that can't be undone. Govern them.

  • Anlyon lists the tools and adopts none.
  • Each tool you adopt gets approvals and receipts.
  • Your agent never holds the key.
Govern this server →

A tool your agent calls directly is not routed through Anlyon and is not governed by it. Anlyon Radar only lists and labels, and these labels are the same either way.

What the Mariner GPS Tools MCP server can do

The Mariner GPS Tools MCP server is published by watchandnavy.com, a domain the MCP Registry verified. It has 6 tools. It can do things that cannot be undone, such as sending, paying or publishing (convert_speed, calculate_distance and calculate_bearing) and create or change data (2 tools: convert_coordinates and calculate_cross_track_error), but cannot delete data. 1 tool only reads.

3 tools can send data out of your system (convert_speed, calculate_distance and calculate_bearing).

None of the fixed checks matched anything in its tool definitions. That is not a safety guarantee.

Its remote endpoint lists its tools without sign-in.

Last scanned Nov 14, 2026, version 1.0.1.

Tools

Grouped by what each tool does, most consequential first. Open one for its reasons and full description; descriptions are the publisher's own words.

6 tools

Can't be undone 3Claude Code: ask
  • calculate_bearingCalculate the initial true bearing between two GPS coordinates.Can send data outNo findings

    Why it is in this group

    • The input addresses people (input.to): what it sends cannot be taken back.

    What it can reach

    • outboundThe input takes a destination (input.to): what the tool writes goes there.
    Description, as the server wrote it
    Calculate the initial true bearing between two GPS coordinates.
  • calculate_distanceCalculate great-circle and rhumb-line routes between two GPS coordinates.Can send data outNo findings

    Why it is in this group

    • The input addresses people (input.to): what it sends cannot be taken back.

    What it can reach

    • outboundThe input takes a destination (input.to): what the tool writes goes there.
    Description, as the server wrote it
    Calculate great-circle and rhumb-line routes between two GPS coordinates.
  • convert_speedConvert a speed value between knots, mph, km/h, m/s, and ft/s.Can send data outNo findings

    Why it is in this group

    • The name "convert_speed" says "convert": a word for a change.
    • The input addresses people (input.to): what it sends cannot be taken back.

    What it can reach

    • outboundThe input takes a destination (input.to): what the tool writes goes there.
    Description, as the server wrote it
    Convert a speed value between knots, mph, km/h, m/s, and ft/s.
Changes things 2Claude Code: ask
  • calculate_cross_track_errorCalculate cross track error (XTE) — the perpendicular distance from a vessel position to the great-circle track between two waypoints — plus side of track (port/starboard) and alon…No findings

    Why it is in this group

    • Nothing in its name or description says what it does, so it is counted as a write.
    Description, as the server wrote it
    Calculate cross track error (XTE) — the perpendicular distance from a vessel position to the great-circle track between two waypoints — plus side of track (port/starboard) and along-track distances.
  • convert_coordinatesParse latitude and longitude and format them as decimal degrees or DMS.No findings

    Why it is in this group

    • The name "convert_coordinates" says "convert": a word for a change.
    Description, as the server wrote it
    Parse latitude and longitude and format them as decimal degrees or DMS.
Only reads 1Show 1 read-only tool
  • list_toolsList the public Mariner GPS Tools calculators currently available.No findings

    Why it is in this group

    • The name "list_tools" says "list": a word for reading.
    Description, as the server wrote it
    List the public Mariner GPS Tools calculators currently available.

This is not a safety rating, and no finding is not a safety guarantee. The groups and findings come from fixed checks of the tool definitions the server returned on the date shown, not from its code or what it does when called. How the checks work.

Exfil surface

Which tools read private data, which read text someone else can write, and which can send data out. One of each is a path a prompt injection can use.

No private-data, untrusted-input, outbound path in this server alone: no tool is tagged private-data or untrusted-input.

Reads private data0
Reads files, mail, messages, databases, secrets, calendars or repositories.
Reads text others write0
Brings in text someone else can write: web pages, inbound email, messages, issues and comments.
Can send data out3
Can carry data to people or systems: it sends, posts or publishes, or takes a recipient, channel or URL.

Other servers in the same agent add their own tools to these paths. Audit your whole setup to see them together.

Remote posture

What anyone on the internet sees at the remote endpoint: an anonymous initialize and tools/list, and the public OAuth metadata.

Tools listed without sign-in

Looked at Nov 20, 2026, 18:50 UTC, unchanged since Oct 22, 2026. No credentials were sent and no tool was called. What is looked at.

Reachable
yes
HTTP status of an anonymous initialize
200
tools/list served without credentials
yes
Tools that change things, listed without credentials
5
Protocol version
2025-06-18
WWW-Authenticate on 401
not observed
resource_metadata in WWW-Authenticate
not observed
RFC 9728 protected resource metadata
https://marinergps.tools/.well-known/oauth-protected-resource/mcp
Authorization servers
https://marinergps.tools
Legacy HTTP+SSE transport
no
Dynamic client registration
yes
Client ID metadata documents
yes
  • HighThe whole server

    The endpoint served tools/list without credentials, and the list has 5 tools that change things (3 irreversible, 2 write). Whether a call also works without credentials was not tested: tools are never called.

    Matched text

    https://marinergps.tools/mcp: tools/list returned 6 tools to an anonymous client, including convert_speed (irreversible), calculate_distance (irreversible), calculate_bearing (irreversible), convert_coordinates (write), calculate_cross_track_error (write)

    What this check looks for

Findings

Matches of fixed checks, with the text they matched.

No check matched anything in these tool definitions. That is not a safety guarantee.

History

Changes to its tool definitions and to its remote endpoint, newest first.

No change seen yet. Its tools are rescanned every day, and a remote endpoint is looked at once a week.

Install

Pinned to version 1.0.1. Values in angle brackets are yours to fill in.

claude mcp add --transport http mariner-gps-tools https://marinergps.tools/mcp
claude mcp add --transport http mariner-gps-tools https://marinergps.tools/mcp

Run in a terminal.

Claude Code permissions

Allow the reads, ask before a change or a way out, deny the deletes. Paste into .claude/settings.json.

.claude/settings.json
{
  "permissions": {
    "allow": [
      "mcp__mariner-gps-tools__list_tools"
    ],
    "ask": [
      "mcp__mariner-gps-tools__convert_speed",
      "mcp__mariner-gps-tools__convert_coordinates",
      "mcp__mariner-gps-tools__calculate_distance",
      "mcp__mariner-gps-tools__calculate_bearing",
      "mcp__mariner-gps-tools__calculate_cross_track_error"
    ],
    "deny": []
  }
}

Tools that only read are allowed, tools that change things ask first, tools that delete or cancel are denied. A read that can send data out (it takes a URL, say) asks first too. It assumes the server is installed as mariner-gps-tools. Review it before you use it.

Capability tags behind 3 rules
  • mcp__mariner-gps-tools__convert_speed outbound
  • mcp__mariner-gps-tools__calculate_distance outbound
  • mcp__mariner-gps-tools__calculate_bearing outbound

Pin

Keep the decision: fail CI when the tools change, follow every change, or show a badge.

Pin in CI

Fail a build when the tools you reviewed are not the tools the server serves today.

curl -s "https://radar.anlyon.com/api/v1/servers/com.watchandnavy/mariner-gps-tools/verify?hash=a12be5af5480f6ec56d980f38d46e45e4350049500c5621ba620095280351514" | jq -e '.changed == false'

Pinned hash a12be5af5480, from Nov 14, 2026, 18:18 UTC.

Watch

Get told when its tools change: a new tool, a new description, a new class.

https://radar.anlyon.com/servers/com.watchandnavy/mariner-gps-tools/changes.xml

An Atom feed. Works in any feed reader or Slack's RSS app.

Badge

Anlyon Radar badge for com.watchandnavy/mariner-gps-tools
[![Anlyon Radar](https://radar.anlyon.com/badge/com.watchandnavy/mariner-gps-tools.svg)](https://radar.anlyon.com/servers/com.watchandnavy/mariner-gps-tools)

Source: MCP Registry. Synced Oct 21, 2026, 18:10 UTC.

Mariner GPS Tools MCP server: questions and answers

Answered from the scan above, not from the publisher's description.

Is the Mariner GPS Tools MCP server safe?

No scan can promise that. What its definitions show: 6 tools, 5 of which can change, send or delete something, and 0 findings from fixed checks. Allow the reads, ask before each change, and deny the deletes; the permissions block on this page does that.

Can the Mariner GPS Tools MCP server delete data?

No tool is classed as destructive: going by their definitions, none of them deletes, cancels or revokes anything.

Can the Mariner GPS Tools MCP server do things that cannot be undone?

Yes. 3 tools can send, pay, publish or merge: convert_speed, calculate_distance and calculate_bearing.

What tools does the Mariner GPS Tools MCP server have?

6 tools: 3 irreversible, 2 write, 1 read. convert_speed, calculate_distance, calculate_bearing, convert_coordinates, calculate_cross_track_error and list_tools.

Does the Mariner GPS Tools MCP server need sign-in or OAuth?

Its remote endpoint listed its tools to an anonymous client, without sign-in.

Does the Mariner GPS Tools MCP server send data to outside services?

3 tools can carry data out (it sends, posts or publishes, or takes a recipient, channel or URL): convert_speed, calculate_distance and calculate_bearing.

Has the Mariner GPS Tools MCP server changed its tools?

Not since Anlyon Radar started tracking it. Last scanned Nov 14, 2026.