Skip to content

Flow Pack MCP server

io.github.Nero-Engine/flow-packNero-Enginestreamable-httpv1.1.0Scanned

Pipe sizing, heat loss, gas record checks and emergency triage for UK plumbers' AI assistants

8 tools: 7 change things and 1 only read.

Tools: 0 delete, 0 irreversible, 7 write, 1 read.
  • Reads private data · 0
  • Reads text others write · 0
  • Can send data out · 7
  • No findings

Tools listed without sign-in. Remote posture

Anlyon alternative

7 of these tools change something. Run those as governed actions.

Declare what an action changes, and Anlyon puts it under a shared limit, binds every approval to the exact request, and grades the outcome. It works on any HTTPS API you can describe as an action.

Anlyon Radar does not run, proxy or govern this MCP server. A tool your own code calls directly is not routed through Anlyon and is not governed by it.

Import an OpenAPI spec →

What the Flow Pack MCP server can do

The Flow Pack MCP server is published by the GitHub account Nero-Engine. It has 8 tools. It can create or change data (7 tools: size_pipe, size_heat_source, size_radiators, check_notifiable_work and 3 more), but cannot delete data. 1 tool only reads.

7 tools can send data out of your system (size_pipe, size_heat_source, size_radiators and 4 more).

None of the fixed checks matched anything in its tool definitions. That is not a safety guarantee.

Its remote endpoint lists its tools without sign-in.

Last scanned Nov 13, 2026, version 1.1.0.

Tools

Grouped by what each tool does, most consequential first. Open one for its reasons and full description; descriptions are the publisher's own words.

8 tools

Changes things 7Claude Code: ask
  • check_gas_recordChecks a filled landlord gas safety record (CP12) or a boiler commissioning record and lists errors and warnings: missing required fields, failed tightness, flue, ventilation or sa…Can send data outNo findings

    Why it is in this group

    • Nothing in its name or description says what it does, so it is counted as a write.
    • The server marks it read-only (readOnlyHint: true), but an annotation never lowers a class.

    What it can reach

    • outboundThe input takes a destination (input.trade.phone): what the tool writes goes there.
    Description, as the server wrote it
    Checks a filled landlord gas safety record (CP12) or a boiler commissioning record and lists errors and warnings: missing required fields, failed tightness, flue, ventilation or safety device checks, CO/CO2 ratio over the limits, gas rate off the rated input, meter pressure out of range, an unsafe appliance marked safe, and the correct next due date (keeping the anniversary for checks done up to 2 months early). Gas safety record fields: property_address, landlord_name, landlord_address, engineer_name, gas_safe_registration_number, engineer_licence_number, check_date, previous_record_expiry_date, next_check_due, engineer_signature, tightness_test_passed, emergency_control_accessible, meter_standing_pressure_mbar, meter_working_pressure_mbar, appliances[] {type, make, model, location, flue_type, flue_check_passed, ventilation_satisfactory, safety_devices_ok, co_ppm, co2_percent, co_co2_ratio, rated_heat_input_kw_gross, measured_gas_rate_m3_h, inlet_working_pressure_mbar, status (safe, ncs, at_risk, immediately_dangerous), safe_to_use, action_taken}. Commissioning fields: property_address, engineer_name, commissioning_date, boiler_type, system_flushed, inhibitor_added, inhibitor_name, filter_fitted, water_hardness_ppm, scale_reducer_fitted, condensate_external_pipe_mm, controls_time_and_temperature, combi_extra_measure, co_alarm_fitted, building_regs_notified, dhw_flow_l_min, dhw_temp_rise_c, appliances[] {make, model, serial_number, co_ppm, co2_percent, min_rate {co_ppm, co2_percent}, rated_heat_input_kw_gross, measured_gas_rate_m3_h}. Up to 30 appliances.

    Annotations the server declares

    • title: Gas record check
    • readOnlyHint: true
    • destructiveHint: false
    • idempotentHint: true
    • openWorldHint: false
  • check_notifiable_workFor plumbing and heating jobs in England or Wales: does it need a Gas Safe registered engineer, an unvented (G3) qualified installer, building regulations notification (Approved Do…Can send data outNo findings

    Why it is in this group

    • Nothing in its name or description says what it does, so it is counted as a write.
    • The server marks it read-only (readOnlyHint: true), but an annotation never lowers a class.

    What it can reach

    • outboundThe input takes a destination (input.trade.phone): what the tool writes goes there.
    Description, as the server wrote it
    For plumbing and heating jobs in England or Wales: does it need a Gas Safe registered engineer, an unvented (G3) qualified installer, building regulations notification (Approved Documents G, J, L and others) and a water company notice (Water Fittings Regulations, regulation 5)? Returns, per job, who can do it, the self-certification route (competent person scheme within 30 days, or building control before starting) and what to do next, including CO alarm and Boiler Plus rules. Typical call: {"nation":"england","work":["gas_boiler_replacement","unvented_cylinder_new"]}.

    Annotations the server declares

    • title: Notifiable work check
    • readOnlyHint: true
    • destructiveHint: false
    • idempotentHint: true
    • openWorldHint: false
  • emergency_triageFor a homeowner reporting a problem: the safe first steps to do now, what not to do, who to call first (the gas emergency service 0800 111 999 for a gas smell or CO alarm), whether…Can send data outNo findings

    Why it is in this group

    • Nothing in its name or description says what it does, so it is counted as a write.
    • The server marks it read-only (readOnlyHint: true), but an annotation never lowers a class.

    What it can reach

    • outboundThe input takes a destination (input.trade.phone): what the tool writes goes there.
    Description, as the server wrote it
    For a homeowner reporting a problem: the safe first steps to do now, what not to do, who to call first (the gas emergency service 0800 111 999 for a gas smell or CO alarm), whether it is a real emergency, and an `urgency` value of routine, soon or emergency that matches Nero Work's three job speeds, raised for water near electrics, a bulging ceiling, a vulnerable person in the cold, or water that cannot be stopped. Also returns `nero_work_job` (urgency, category, summary) ready to post. Typical call: {"situation":"no_heat","vulnerable_people":true,"outside_temp_c":2,"other_heating_available":false}.

    Annotations the server declares

    • title: Emergency triage
    • readOnlyHint: true
    • destructiveHint: false
    • idempotentHint: true
    • openWorldHint: false
  • size_heat_sourceWorks out the heat loss of each room (fabric U x A x delta T plus ventilation 0.33 x air changes x volume x delta T) and the total, then sizes a combi, system or regular boiler, or…Can send data outNo findings

    Why it is in this group

    • Nothing in its name or description says what it does, so it is counted as a write.
    • The server marks it read-only (readOnlyHint: true), but an annotation never lowers a class.

    What it can reach

    • outboundThe input takes a destination (input.trade.phone): what the tool writes goes there.
    Description, as the server wrote it
    Works out the heat loss of each room (fabric U x A x delta T plus ventilation 0.33 x air changes x volume x delta T) and the total, then sizes a combi, system or regular boiler, or a heat pump, to the nearest common size. Combi sizing also checks the hot water load (flow x temperature rise). Give each room's type, size and its walls, windows, roof and floor with U values, or construction presets for indicative values. Returns per-room losses with every element's working, the total, the size, `status` (indicative when presets were used), `must_check` and sources. Typical call: {"heat_source":"heat_pump","outside_design_temp_c":-3,"rooms":[{"name":"Lounge","type":"living","floor_area_m2":20,"elements":[{"type":"wall","area_m2":7.8,"construction":"cavity_wall_unfilled"},{"type":"window","area_m2":1.8,"construction":"double_glazed_old"}]}]}.

    Annotations the server declares

    • title: Heat loss and heat source size
    • readOnlyHint: true
    • destructiveHint: false
    • idempotentHint: true
    • openWorldHint: false
  • size_pipeSizes a hot or cold water pipe, or a low-pressure gas pipe, and shows the working.Can send data outNo findings

    Why it is in this group

    • Nothing in its name or description says what it does, so it is counted as a write.
    • The server marks it read-only (readOnlyHint: true), but an annotation never lowers a class.

    What it can reach

    • outboundThe input takes a destination (input.trade.phone): what the tool writes goes there.
    Description, as the server wrote it
    Sizes a hot or cold water pipe, or a low-pressure gas pipe, and shows the working. Water: design flow (from outlets, with a simple in-use-at-once rule, or a flow you give), velocity against a limit (1.5 m/s default), pressure loss per metre and in total, and the pressure left at the outlet if you give the supply pressure. Gas: flow from the gross heat input of the appliances fed, pressure drop against the 1 mbar natural gas (2.5 mbar LPG) allowance, with a meter capacity warning. Returns `recommended` (smallest size that passes), `sizes_considered`, `must_check` (points the engineer confirms) and sources. Calculated from fluid physics (Darcy-Weisbach); no BS EN 806 or BS 6891 tables are reproduced. Typical calls: {"medium":"gas","heat_input_kw_gross":30,"run_length_m":12,"fittings":{"elbows":5}} or {"medium":"water","service":"cold","outlets":[{"type":"bath"},{"type":"kitchen_sink"},{"type":"basin"},{"type":"wc"},{"type":"shower_mixer"}],"run_length_m":15,"supply_pressure_bar":2.5,"height_rise_m":3}.

    Annotations the server declares

    • title: Water or gas pipe size
    • readOnlyHint: true
    • destructiveHint: false
    • idempotentHint: true
    • openWorldHint: false
  • size_radiatorsFor each room's heat loss, works out the rated (delta T 50) radiator output needed at the system's flow and return temperatures, using output = rated x (mean water to air differenc…Can send data outNo findings

    Why it is in this group

    • Nothing in its name or description says what it does, so it is counted as a write.
    • The server marks it read-only (readOnlyHint: true), but an annotation never lowers a class.

    What it can reach

    • outboundThe input takes a destination (input.trade.phone): what the tool writes goes there.
    Description, as the server wrote it
    For each room's heat loss, works out the rated (delta T 50) radiator output needed at the system's flow and return temperatures, using output = rated x (mean water to air difference / 50) ^ 1.3. Shows how far an existing radiator falls short, the water flow per radiator, indicative lengths by panel type, and with compare_flow_temp_c how much bigger radiators must be at a lower flow temperature (for example 70 C boiler to 45 C heat pump). Typical call: {"flow_temp_c":45,"rooms":[{"name":"Lounge","heat_loss_w":1500,"existing_rated_output_w":1800}],"compare_flow_temp_c":70}.

    Annotations the server declares

    • title: Radiator sizing
    • readOnlyHint: true
    • destructiveHint: false
    • idempotentHint: true
    • openWorldHint: false
  • trade_profileChecks the business's own details (Nero Trade Profile v1: trading name, Companies House number, registration scheme and number, postcode, contact) and returns them cleaned, with a …Can send data outNo findings

    Why it is in this group

    • Nothing in its name or description says what it does, so it is counted as a write.
    • The server marks it read-only (readOnlyHint: true), but an annotation never lowers a class.

    What it can reach

    • outboundThe input takes a destination (input.trade.phone): what the tool writes goes there.
    Description, as the server wrote it
    Checks the business's own details (Nero Trade Profile v1: trading name, Companies House number, registration scheme and number, postcode, contact) and returns them cleaned, with a stable `nero_trade_ref` computed from the scheme registration (licence_body gas_safe plus the Gas Safe registration number) or the company number. The same shape and reference as Spark Pack, so one business keeps one reference across trades. The same object, given as `trade` to the other tools, prefills records. Flow Pack stores nothing. The same profile and reference can later be used to sign the business into Nero Work, the agent job exchange for trades.

    Annotations the server declares

    • title: Check business details
    • readOnlyHint: true
    • destructiveHint: false
    • idempotentHint: true
    • openWorldHint: false
Only reads 1Show 1 read-only tool
  • list_capabilitiesLists Flow Pack's tools, what it covers (nations, pipe materials, gases, record types, emergency situations) and what it deliberately does not do.No findings

    Why it is in this group

    • The name "list_capabilities" says "list": a word for reading.
    Description, as the server wrote it
    Lists Flow Pack's tools, what it covers (nations, pipe materials, gases, record types, emergency situations) and what it deliberately does not do. Free, needs no input.

    Annotations the server declares

    • title: What Flow Pack can do
    • readOnlyHint: true
    • destructiveHint: false
    • idempotentHint: true
    • openWorldHint: false

This is not a safety rating, and no finding is not a safety guarantee. The groups and findings come from fixed checks of the tool definitions the server returned on the date shown, not from its code or what it does when called. How the checks work.

Exfil surface

Which tools read private data, which read text someone else can write, and which can send data out. One of each is a path a prompt injection can use.

No private-data, untrusted-input, outbound path in this server alone: no tool is tagged private-data or untrusted-input.

Reads private data0
Reads files, mail, messages, databases, secrets, calendars or repositories.
Reads text others write0
Brings in text someone else can write: web pages, inbound email, messages, issues and comments.
Can send data out7
Can carry data to people or systems: it sends, posts or publishes, or takes a recipient, channel or URL.

Other servers in the same agent add their own tools to these paths. Audit your whole setup to see them together.

Remote posture

What anyone on the internet sees at the remote endpoint: an anonymous initialize and tools/list, and the public OAuth metadata.

Tools listed without sign-in

Looked at Nov 20, 2026, 18:21 UTC, unchanged since Nov 13, 2026. No credentials were sent and no tool was called. What is looked at.

Reachable
yes
HTTP status of an anonymous initialize
200
tools/list served without credentials
yes
Tools that change things, listed without credentials
7
Protocol version
2025-06-18
WWW-Authenticate on 401
not observed
resource_metadata in WWW-Authenticate
not observed
RFC 9728 protected resource metadata
https://flow-pack.nerolabs.workers.dev/.well-known/oauth-protected-resource/mcp
Authorization servers
not observed
Legacy HTTP+SSE transport
no
Dynamic client registration
not observed
Client ID metadata documents
not observed
  • WarnThe whole server

    The endpoint served tools/list without credentials, and the list has 7 tools that change things (7 write). Whether a call also works without credentials was not tested: tools are never called.

    Matched text

    https://flow-pack.nerolabs.workers.dev/mcp: tools/list returned 8 tools to an anonymous client, including size_pipe (write), size_heat_source (write), size_radiators (write), check_notifiable_work (write), check_gas_record (write) and 2 more

    What this check looks for

Findings

Matches of fixed checks, with the text they matched.

No check matched anything in these tool definitions. That is not a safety guarantee.

History

Changes to its tool definitions and to its remote endpoint, newest first.

No change seen yet. Its tools are rescanned every day, and a remote endpoint is looked at once a week.

Install

Pinned to version 1.1.0. Values in angle brackets are yours to fill in.

claude mcp add --transport http flow-pack https://flow-pack.nerolabs.workers.dev/mcp
claude mcp add --transport http flow-pack https://flow-pack.nerolabs.workers.dev/mcp

Run in a terminal.

Claude Code permissions

Allow the reads, ask before a change or a way out, deny the deletes. Paste into .claude/settings.json.

.claude/settings.json
{
  "permissions": {
    "allow": [
      "mcp__flow-pack__list_capabilities"
    ],
    "ask": [
      "mcp__flow-pack__size_pipe",
      "mcp__flow-pack__size_heat_source",
      "mcp__flow-pack__size_radiators",
      "mcp__flow-pack__check_notifiable_work",
      "mcp__flow-pack__check_gas_record",
      "mcp__flow-pack__emergency_triage",
      "mcp__flow-pack__trade_profile"
    ],
    "deny": []
  }
}

Tools that only read are allowed, tools that change things ask first, tools that delete or cancel are denied. A read that can send data out (it takes a URL, say) asks first too. It assumes the server is installed as flow-pack. Review it before you use it.

Capability tags behind 7 rules
  • mcp__flow-pack__size_pipe outbound
  • mcp__flow-pack__size_heat_source outbound
  • mcp__flow-pack__size_radiators outbound
  • mcp__flow-pack__check_notifiable_work outbound
  • mcp__flow-pack__check_gas_record outbound
  • mcp__flow-pack__emergency_triage outbound
  • mcp__flow-pack__trade_profile outbound

Pin

Keep the decision: fail CI when the tools change, follow every change, or show a badge.

Pin in CI

Fail a build when the tools you reviewed are not the tools the server serves today.

curl -s "https://radar.anlyon.com/api/v1/servers/io.github.Nero-Engine/flow-pack/verify?hash=2d11128759a03718907792c7c2e5ba527bf60aa25ceb9cae9dbf6e251179c9b3" | jq -e '.changed == false'

Pinned hash 2d11128759a0, from Nov 13, 2026, 01:18 UTC.

Watch

Get told when its tools change: a new tool, a new description, a new class.

https://radar.anlyon.com/servers/io.github.Nero-Engine/flow-pack/changes.xml

An Atom feed. Works in any feed reader or Slack's RSS app.

Badge

Anlyon Radar badge for io.github.Nero-Engine/flow-pack
[![Anlyon Radar](https://radar.anlyon.com/badge/io.github.Nero-Engine/flow-pack.svg)](https://radar.anlyon.com/servers/io.github.Nero-Engine/flow-pack)

Source: MCP Registry · repository. Synced Nov 13, 2026, 01:17 UTC.

Flow Pack MCP server: questions and answers

Answered from the scan above, not from the publisher's description.

Is the Flow Pack MCP server safe?

No scan can promise that. What its definitions show: 8 tools, 7 of which can change, send or delete something, and 0 findings from fixed checks. Allow the reads, ask before each change, and deny the deletes; the permissions block on this page does that.

Can the Flow Pack MCP server delete data?

No tool is classed as destructive: going by their definitions, none of them deletes, cancels or revokes anything.

Can the Flow Pack MCP server do things that cannot be undone?

No tool is classed as irreversible: none of them sends, pays, publishes or merges, going by their definitions.

What tools does the Flow Pack MCP server have?

8 tools: 7 write, 1 read. size_pipe, size_heat_source, size_radiators, check_notifiable_work, check_gas_record, emergency_triage, trade_profile and list_capabilities.

Does the Flow Pack MCP server need sign-in or OAuth?

Its remote endpoint listed its tools to an anonymous client, without sign-in.

Does the Flow Pack MCP server send data to outside services?

7 tools can carry data out (it sends, posts or publishes, or takes a recipient, channel or URL): size_pipe, size_heat_source, size_radiators, check_notifiable_work, check_gas_record, emergency_triage and 1 more.

Has the Flow Pack MCP server changed its tools?

Not since Anlyon Radar started tracking it. Last scanned Nov 13, 2026.