Fredenslund workshop tools MCP server
io.github.afredenslund/fredenslund-workshop-toolsafredenslundstreamable-httpv1.0.10Scanned
MFT/3 hole patterns (Shaper-ready SVG) and French cleat wall plans with cut lists. Free, unofficial.
2 tools: 2 change things.
- Reads private data · 0
- Reads text others write · 0
- Can send data out · 0
- No findings
Tools listed without sign-in. Remote posture
With Anlyon
2 tools here change things. Govern them.
- Anlyon lists the tools and adopts none.
- Each tool you adopt gets approvals and receipts.
- Your agent never holds the key.
A tool your agent calls directly is not routed through Anlyon and is not governed by it. Anlyon Radar only lists and labels, and these labels are the same either way.
What the Fredenslund workshop tools MCP server can do
The Fredenslund workshop tools MCP server is published by the GitHub account afredenslund. It has 2 tools. It can create or change data (2 tools: mft3_hole_pattern and french_cleat_plan), but cannot delete data. None of its tools only reads.
None of its tools reads private data, brings in text other people write, or sends data out.
None of the fixed checks matched anything in its tool definitions. That is not a safety guarantee.
Its remote endpoint lists its tools without sign-in.
Last scanned Nov 16, 2026, version 1.0.10.
Tools
Grouped by what each tool does, most consequential first. Open one for its reasons and full description; descriptions are the publisher's own words.
2 tools
Changes things 2Claude Code: ask
french_cleat_planPlan a French cleat wall for a workshop with the Fredenslund cleat system: 90 mm cleat boards and 90 mm gaps (180 mm pitch), hook plate 72 mm including 12 mm material, 30 mm buffer…No findings
Why it is in this group
- Nothing in its name or description says what it does, so it is counted as a write.
- The server marks it read-only (readOnlyHint: true), but an annotation never lowers a class.
Description, as the server wrote it Plan a French cleat wall for a workshop with the Fredenslund cleat system: 90 mm cleat boards and 90 mm gaps (180 mm pitch), hook plate 72 mm including 12 mm material, 30 mm buffer between hangers, a 900 mm table that hangs on its own cleat one hook lower (cleat top 840) with the rows following that cleat, top cleat at least one gap below the ceiling, lowest cleat at least 210 mm above the floor (its underside; rows 300 … 2280 on the default wall). A hanger comes off by lifting it the material + 3 mm, so the hook plate is at most the gap − 3 and the top cleat at least the hook plate + 3 below the ceiling. The default wall is a full plywood sheet, 1220 × 2440 mm. Give the wall size and the hangers to hang (hooks, shelves, boxes, panels: left edge, the cleat row it hangs on, width, extra rows spanned below — a shelf usually spans one row). Returns the cleat rows (cleat top heights from the floor), every hanger with its panel height and whether it fits — and why not (row missing, row off, outside wall, collision) — the cut list with cleat metres, wall coverage, a picture of the wall (a link to a 1200 × 630 PNG) and a link that opens the same plan editable in the tool. All values in mm. Call with no hangers to get the rows for a wall first. Beta.
Annotations the server declares
- title: French cleat wall plan
- readOnlyHint: true
- destructiveHint: false
- idempotentHint: true
- openWorldHint: false
mft3_hole_patternFestool MFT/3 dog-hole pattern for a table top of any size.No findings
Why it is in this group
- Nothing in its name or description says what it does, so it is counted as a write.
- The server marks it read-only (readOnlyHint: true), but an annotation never lowers a class.
Description, as the server wrote it Festool MFT/3 dog-hole pattern for a table top of any size. The requested width and depth snap to the nearest valid MFT/3 size (46 + 96 × n mm, n = 1–20, i.e. 142–1966 mm): Ø20 mm holes on a 96 mm grid with the first hole centred 71 mm from every edge, plus the four corner screw holes (Ø11 through, Ø15 counterbore). Returns the snapped size, hole count, every hole and screw-hole position, the Shaper export depths, the file name, a link to the true-to-scale SVG for Shaper Origin/Studio, a picture of the top (a link to a 1200 × 630 PNG) and a link that opens the size in the tool. When you present the result, link the SVG file (it is what the person cuts from), the picture and the tool. The original MFT/3 top is 1102 × 718 mm (11 × 7 holes). Unofficial hobby tool, not affiliated with Festool or Shaper.
Annotations the server declares
- title: MFT/3 hole pattern
- readOnlyHint: true
- destructiveHint: false
- idempotentHint: true
- openWorldHint: false
This is not a safety rating, and no finding is not a safety guarantee. The groups and findings come from fixed checks of the tool definitions the server returned on the date shown, not from its code or what it does when called. How the checks work.
Exfil surface
Which tools read private data, which read text someone else can write, and which can send data out. One of each is a path a prompt injection can use.
No private-data, untrusted-input, outbound path in this server alone: no tool is tagged private-data or untrusted-input or outbound.
- Reads private data0
- Reads files, mail, messages, databases, secrets, calendars or repositories.
- Reads text others write0
- Brings in text someone else can write: web pages, inbound email, messages, issues and comments.
- Can send data out0
- Can carry data to people or systems: it sends, posts or publishes, or takes a recipient, channel or URL.
Other servers in the same agent add their own tools to these paths. Audit your whole setup to see them together.
Remote posture
What anyone on the internet sees at the remote endpoint: an anonymous initialize and tools/list, and the public OAuth metadata.
Looked at Nov 20, 2026, 19:01 UTC, unchanged since Oct 22, 2026. No credentials were sent and no tool was called. What is looked at.
- Reachable
- yes
- HTTP status of an anonymous initialize
- 200
- tools/list served without credentials
- yes
- Tools that change things, listed without credentials
- 2
- Protocol version
- 2025-06-18
- WWW-Authenticate on 401
- not observed
- resource_metadata in WWW-Authenticate
- not observed
- RFC 9728 protected resource metadata
- not observed
- Authorization servers
- not observed
- Legacy HTTP+SSE transport
- no
- Dynamic client registration
- not observed
- Client ID metadata documents
- not observed
- WarnThe whole server
The endpoint served tools/list without credentials, and the list has 2 tools that change things (2 write). Whether a call also works without credentials was not tested: tools are never called.
What this check looks forMatched text
https://fredenslund.dk/mcp: tools/list returned 2 tools to an anonymous client, including mft3_hole_pattern (write), french_cleat_plan (write)
Findings
Matches of fixed checks, with the text they matched.
No check matched anything in these tool definitions. That is not a safety guarantee.
History
Changes to its tool definitions and to its remote endpoint, newest first.
No change seen yet. Its tools are rescanned every day, and a remote endpoint is looked at once a week.
Install
Pinned to version 1.0.10. Values in angle brackets are yours to fill in.
claude mcp add --transport http fredenslund-workshop-tools https://fredenslund.dk/mcpclaude mcp add --transport http fredenslund-workshop-tools https://fredenslund.dk/mcpRun in a terminal.
Claude Code permissions
Allow the reads, ask before a change or a way out, deny the deletes. Paste into .claude/settings.json.
{
"permissions": {
"allow": [],
"ask": [
"mcp__fredenslund-workshop-tools__mft3_hole_pattern",
"mcp__fredenslund-workshop-tools__french_cleat_plan"
],
"deny": []
}
}Tools that only read are allowed, tools that change things ask first, tools that delete or cancel are denied. A read that can send data out (it takes a URL, say) asks first too. It assumes the server is installed as fredenslund-workshop-tools. Review it before you use it.
Pin
Keep the decision: fail CI when the tools change, follow every change, or show a badge.
Pin in CI
Fail a build when the tools you reviewed are not the tools the server serves today.
curl -s "https://radar.anlyon.com/api/v1/servers/io.github.afredenslund/fredenslund-workshop-tools/verify?hash=eae518c015771aa5f9d3d11538115efe96163e218aef28b92366292ea835ff67" | jq -e '.changed == false'Pinned hash eae518c01577, from Nov 16, 2026, 21:18 UTC.
Watch
Get told when its tools change: a new tool, a new description, a new class.
https://radar.anlyon.com/servers/io.github.afredenslund/fredenslund-workshop-tools/changes.xmlAn Atom feed. Works in any feed reader or Slack's RSS app.
Badge
[](https://radar.anlyon.com/servers/io.github.afredenslund/fredenslund-workshop-tools)Source: MCP Registry. Synced Oct 21, 2026, 18:22 UTC.
Fredenslund workshop tools MCP server: questions and answers
Answered from the scan above, not from the publisher's description.
Is the Fredenslund workshop tools MCP server safe?
- No scan can promise that. What its definitions show: 2 tools, 2 of which can change, send or delete something, and 0 findings from fixed checks. Allow the reads, ask before each change, and deny the deletes; the permissions block on this page does that.
Can the Fredenslund workshop tools MCP server delete data?
- No tool is classed as destructive: going by their definitions, none of them deletes, cancels or revokes anything.
Can the Fredenslund workshop tools MCP server do things that cannot be undone?
- No tool is classed as irreversible: none of them sends, pays, publishes or merges, going by their definitions.
What tools does the Fredenslund workshop tools MCP server have?
- 2 tools: 2 write. mft3_hole_pattern and french_cleat_plan.
Does the Fredenslund workshop tools MCP server need sign-in or OAuth?
- Its remote endpoint listed its tools to an anonymous client, without sign-in.
Does the Fredenslund workshop tools MCP server send data to outside services?
- None of its tools sends, posts or publishes, or takes a recipient, channel or URL.
Has the Fredenslund workshop tools MCP server changed its tools?
- Not since Anlyon Radar started tracking it. Last scanned Nov 16, 2026.