MeteoSwiss MCP Server
io.github.eins78/meteoswiss-mcpeins78streamable-httpv2.0.2Scanned
Swiss weather data for AI assistants — forecasts, measurements, stations, pollen.
8 tools: 8 only read.
- Reads private data · 0
- Reads text others write · 2
- Can send data out · 0
- 2 findings
Tools listed without sign-in. Remote posture
With Anlyon
Decide which of this server's tools your agent can use.
- Anlyon lists the tools and adopts none.
- Each tool you adopt gets approvals and receipts.
- Your agent never holds the key.
A tool your agent calls directly is not routed through Anlyon and is not governed by it. Anlyon Radar only lists and labels, and these labels are the same either way.
What the MeteoSwiss MCP Server can do
The MeteoSwiss MCP Server is published by the GitHub account eins78. It has 8 tools. Every one of them only reads: going by their definitions, none of them creates, changes, sends or deletes anything.
2 tools bring in text other people can write (search and fetch).
The fixed checks matched 2 findings (long-description). Each one comes with the text it matched.
Its remote endpoint lists its tools without sign-in, and its tools changed once since Anlyon Radar first saw them.
Last scanned Nov 19, 2026, version 2.0.2.
Tools
Grouped by what each tool does, most consequential first. Open one for its reasons and full description; descriptions are the publisher's own words.
8 tools
Only reads 8Show 8 read-only tools
fetchFetch full content from a MeteoSwiss webpage and convert to markdown or plain text.Reads text others writeNo findings
Why it is in this group
- The name "fetch" says "fetch": a word for reading.
What it can reach
- untrusted-inputThe description's first sentence says "fetch" and "webpage": it reads web pages, which anyone can write.
Description, as the server wrote it Fetch full content from a MeteoSwiss webpage and convert to markdown or plain text. Use the search tool first to discover valid page URLs, then pass the full URL as the id parameter.
meteoswissClimateDataGet homogeneous climate measurement series from Switzerland's National Basic Climatic Network (NBCN).No findings
Why it is in this group
- The description's first verb is "get": a word for reading.
Description, as the server wrote it Get homogeneous climate measurement series from Switzerland's National Basic Climatic Network (NBCN). Returns temperature, precipitation, sunshine, radiation, wind, pressure, and climate indicators (frost days, summer days, heat days) going back decades. 29 climate stations + 46 precipitation stations with daily, monthly, and yearly resolution. Use cases: "What are typical January temperatures in Zurich?", "How has precipitation changed in Basel over 50 years?", "How many heat days did Lugano have last year?" Accepts station names ("Zurich", "Basel"), abbreviations ("SMA", "BAS"), or WGS84 coordinates.
meteoswissCurrentWeatherGet real-time weather measurements from ~300 Swiss automatic weather stations (~160 full weather + ~140 precipitation-only).No findings
Why it is in this group
- The description's first verb is "get": a word for reading.
Description, as the server wrote it Get real-time weather measurements from ~300 Swiss automatic weather stations (~160 full weather + ~140 precipitation-only). Returns temperature, precipitation, wind, humidity, pressure, sunshine, and more. Data updates every 10 minutes. Precipitation-only stations return only rainfall data. For 8 stations (Zurich, Basel, Chur, Sion, Altdorf, Säntis, Jungfraujoch, Grand St-Bernard), also includes daily visual observations: cloud cover, fog, rain, snowfall, hail, and snow coverage. Accepts station names ("Zurich"), abbreviations ("SMA"), addresses ("Bahnhofplatz 1 Bern"), or WGS84 coordinates. Automatically finds the nearest station.
meteoswissLocalForecastGet a multi-day weather forecast for any Swiss location.1 finding
Why it is in this group
- The description's first verb is "get": a word for reading.
Findings
- Info
The description is 3,561 characters long, over the 2,000 this check looks for.
What this check looks forMatched text
description ends: "...shown alongside it, so it always matches summing/averaging that series exactly."
Description, as the server wrote it Get a multi-day weather forecast for any Swiss location. Returns daily summaries (temperature, precipitation, sunshine, wind, weather icon) plus a hierarchical hourly breakdown of every series. This uses official MeteoSwiss Open Data — the same forecasts powering the MeteoSwiss app and website. For a question about an area rather than a place (where in Switzerland it is sunny, how high the fog reaches, which side of the Alps is wet), use meteoswissWeatherSituation: one call counts all forecast points, instead of one call per place here. Accepts: - Postal codes: "8001" (Zurich), "3000" (Bern), "1200" (Geneva) - Station abbreviations: "SMA" (Zurich Fluntern), "BER" (Bern) - Place names: "Zurich", "Basel", "Lugano" Coverage: ~6000 Swiss locations (all postal codes + weather stations + mountain points). Forecast horizon: up to 9 days. Updated hourly. Each day's summary fields: temperature_min_c, temperature_max_c, precipitation_total_mm, sunshine_total_minutes, wind_avg_kmh, wind_gust_max_kmh, weather, weather_icon_url. Each day also includes "hourly": one array of per-hour objects covering every series together — { time, temperature_c, precip_mm, sunshine_minutes, wind_kmh, wind_gust_kmh } — useful for judging *when* rain, sun or wind is expected, not just the daily summary. With detail: "sky", each hourly object also has weather_code, weather, cloud_low_pct, cloud_mid_pct and cloud_high_pct; use it for fog, stratus or low cloud questions: - Each entry's "time" is already local wall-clock time for the location (Europe/Zurich), with the UTC offset included, e.g. "2026-07-09T14:00:00+02:00". It is NOT UTC — do not convert it. - With detail: "sky": "weather" / "weather_code" is MeteoSwiss's weather symbol (e.g. "fog", "stratus", "very cloudy, light rain"), one value per hour, describing the 3 hours that end at "time". The day's "weather" is one symbol for the daytime only. The cloud fields are the cover at "time". The symbol does not always name low stratus: an "overcast" hour with cloud_low_pct near 100 and little mid or high cloud is a low cloud deck. - With detail: "sky", "warnings" appears only when one of the extra files could not be loaded; the fields from that file are then null for every hour. - A dry/calm/sunless hour is reported as its measured value (often 0), not omitted. A fully dry day is still a full array of zero-precipitation hours, not an empty array. - Each field is independently null if just THAT series has no reading for a given hour — the other fields for that same hour are still populated. An hour is omitted entirely only when temperature, precipitation, sunshine, wind and gust are all missing for it. - "hourly" itself is null when no hourly breakdown exists for this location at all (a total data gap); [] only when this location supports hourly data but none was available for that specific day. - For weather stations, temperature_min_c/temperature_max_c/precipitation_total_mm are MeteoSwiss's own official daily aggregates — a different, separately-curated product from the hourly series shown alongside them. They can legitimately NOT match summing/ averaging the hourly entries for that day; this is expected, not a data error. sunshine_total_minutes/wind_avg_kmh/wind_gust_max_kmh have no official daily product for stations and are always derived from the hourly series. For postal codes/mountain points, every summary field is derived from the same hourly series shown alongside it, so it always matches summing/averaging that series exactly.
meteoswissPollenDataGet current pollen concentration data from MeteoSwiss monitoring stations (~15 stations across Switzerland).No findings
Why it is in this group
- The description's first verb is "get": a word for reading.
Description, as the server wrote it Get current pollen concentration data from MeteoSwiss monitoring stations (~15 stations across Switzerland). Shows pollen levels for 7 measured species (alder, birch, hazel, beech, ash, oak, grasses) — each is always included, with a "no-current-data" status when out of season. Ambrosia (ragweed) is a MeteoSwiss forecast-only category and is not part of this OGD measurement network, so it is not included. Useful for allergy sufferers.
meteoswissStationsList and search MeteoSwiss measurement stations.No findings
Why it is in this group
- The description's first verb is "list": a word for reading.
Description, as the server wrote it List and search MeteoSwiss measurement stations. Filter by name, canton, or browse the full network of ~300 stations (~160 full weather + ~140 precipitation-only) across Switzerland.
meteoswissWeatherSituationCount the weather over Switzerland at one hour: MeteoSwiss's hourly weather symbol at all ~5800 forecast points (postal code centres, weather stations, mountain points), grouped in…1 finding
Why it is in this group
- The description's first verb is "count": a word for reading.
Findings
- Info
The description is 3,356 characters long, over the 2,000 this check looks for.
What this check looks forMatched text
description ends: "...Data; the forecast regions come from the MeteoSwiss website (Source: MeteoSwiss)."
Description, as the server wrote it Count the weather over Switzerland at one hour: MeteoSwiss's hourly weather symbol at all ~5800 forecast points (postal code centres, weather stations, mountain points), grouped into weather categories per MeteoSwiss forecast region and altitude band. Use it for area questions: where it is sunny, how high the fog or low stratus reaches, whether it is sunny above it, where it rains or snows. For the forecast at one place, use meteoswissLocalForecast. Regions are MeteoSwiss's seven forecast regions: jura, mittelland (Swiss Plateau), alpennordhang (northern Alps and Prealps), wallis (Valais), engadin, nordundmittelbuenden (northern and central Grisons), alpensuedseite (southern side of the Alps: Ticino and the southern valleys of Grisons). Points outside MeteoSwiss's seven regions are counted in the nearest one. Narrow the count with region, bbox (a WGS84 box), near (air distance around a place, at most 150 km) and min_altitude_m / max_altitude_m; given together, a point must pass all of them. With until, the count covers every hour from time to until, at most 12 hours after time (up to 13 hourly steps). Categories: sunny, clear_night, partly_sunny, cloudy, high_cloud, fog_or_stratus, rain, sleet, snow, thunder; the answer's "legend" gives the symbol codes of each. fog_or_stratus also counts an overcast or partly sunny hour under a low cloud deck (low cloud >= 80 %, medium and high cloud < 50 %): MeteoSwiss's symbol often shows such a deck as "overcast". Reading the answer: - Times are local Europe/Zurich time with the UTC offset. The symbol of an hour describes the 3 hours that end at that time. - "points" counts forecast points, not area: they are dense in towns and the lowlands and sparse in the mountains. A band with few points says little. A few places have two points (a station and a regional forecast point at the same spot); both count. - Around sunrise and sunset MeteoSwiss switches the points from day to night symbols at different hours, so one clear sky can show as both sunny and clear_night: add them for "clear sky" at those hours. - At high altitude fog_or_stratus usually means a summit in cloud (MeteoSwiss's own fog symbol), not a fog sea: for a fog question leave the summits out with max_altitude_m. - Per band, "pct" holds the shares in whole percent (they add up to 100) and "dominant" the most frequent category. - jura, mittelland and alpennordhang also carry "fog_top_m" (experimental): the top of a fog sea to the nearest 100 m: the 100 m bands that are mostly fog_or_stratus, starting with the region's lowest band (below 1000 m) up, with mostly sun in the 300 m above ("sunny_above_fog_pct"). null means no fog sea with sun above: no fog layer low down, or cloud above it. Over a window (until) all point-hours are pooled into one estimate for the whole window. For a fog question, also read the bands yourself. - With map: "grid", "grid.rows" is a coarse map, north at the top: one character per 5 km cell, the most frequent category there ("grid.key"). Use it to say where (west or east, which valleys) rather than how much. - The forecast is updated hourly. Further ahead it may have symbols only every few hours; a time the run does not cover is an error that names the hours it has. Source: MeteoSwiss Open Data; the forecast regions come from the MeteoSwiss website (Source: MeteoSwiss).
searchSearch MeteoSwiss website content in multiple languages (DE, FR, IT, EN).Reads text others writeNo findings
Why it is in this group
- The name "search" says "search": a word for reading.
What it can reach
- untrusted-inputThe description's first sentence says "search" and "website": it reads web pages, which anyone can write.
Description, as the server wrote it Search MeteoSwiss website content in multiple languages (DE, FR, IT, EN). Returns relevant pages with URLs that can be passed to the fetch tool. The pages hold articles and explanations, not forecast or measurement data: for a forecast use meteoswissLocalForecast (one place) or meteoswissWeatherSituation (all of Switzerland, e.g. where it is sunny or foggy). Always returns up to 10 results per page — the upstream API has a fixed page size that cannot be changed. Note: pagination may return duplicate results across pages (upstream API limitation).
This is not a safety rating, and no finding is not a safety guarantee. The groups and findings come from fixed checks of the tool definitions the server returned on the date shown, not from its code or what it does when called. How the checks work.
Exfil surface
Which tools read private data, which read text someone else can write, and which can send data out. One of each is a path a prompt injection can use.
No private-data, untrusted-input, outbound path in this server alone: no tool is tagged private-data or outbound.
- Reads private data0
- Reads files, mail, messages, databases, secrets, calendars or repositories.
- Reads text others write2
- Brings in text someone else can write: web pages, inbound email, messages, issues and comments.
- Can send data out0
- Can carry data to people or systems: it sends, posts or publishes, or takes a recipient, channel or URL.
Other servers in the same agent add their own tools to these paths. Audit your whole setup to see them together.
Remote posture
What anyone on the internet sees at the remote endpoint: an anonymous initialize and tools/list, and the public OAuth metadata.
Looked at Nov 20, 2026, 19:04 UTC, unchanged since Oct 22, 2026. No credentials were sent and no tool was called. What is looked at.
- Reachable
- yes
- HTTP status of an anonymous initialize
- 200
- tools/list served without credentials
- yes
- Tools that change things, listed without credentials
- 0
- Protocol version
- 2025-06-18
- WWW-Authenticate on 401
- not observed
- resource_metadata in WWW-Authenticate
- not observed
- RFC 9728 protected resource metadata
- not observed
- Authorization servers
- not observed
- Legacy HTTP+SSE transport
- no
- Dynamic client registration
- not observed
- Client ID metadata documents
- not observed
Findings
Matches of fixed checks, with the text they matched.
The description is 3,561 characters long, over the 2,000 this check looks for.
What this check looks forMatched text
description ends: "...shown alongside it, so it always matches summing/averaging that series exactly."
The description is 3,356 characters long, over the 2,000 this check looks for.
What this check looks forMatched text
description ends: "...Data; the forecast regions come from the MeteoSwiss website (Source: MeteoSwiss)."
History
Changes to its tool definitions and to its remote endpoint, newest first.
Tools1 added, 2 changed.+1 added~2 changedView diff
- Added:meteoswissWeatherSituationOnly reads
- Changed:meteoswissLocalForecastOnly readsdescriptioninputSchema
- Changed:searchOnly readsdescription
Install
Pinned to version 2.0.2. Values in angle brackets are yours to fill in.
claude mcp add --transport http meteoswiss https://meteoswiss-mcp.ars.is/mcpclaude mcp add --transport http meteoswiss https://meteoswiss-mcp.ars.is/mcpRun in a terminal.
Claude Code permissions
Allow the reads, ask before a change or a way out, deny the deletes. Paste into .claude/settings.json.
{
"permissions": {
"allow": [
"mcp__meteoswiss__search",
"mcp__meteoswiss__fetch",
"mcp__meteoswiss__meteoswissLocalForecast",
"mcp__meteoswiss__meteoswissWeatherSituation",
"mcp__meteoswiss__meteoswissCurrentWeather",
"mcp__meteoswiss__meteoswissStations",
"mcp__meteoswiss__meteoswissPollenData",
"mcp__meteoswiss__meteoswissClimateData"
],
"ask": [],
"deny": []
}
}Tools that only read are allowed, tools that change things ask first, tools that delete or cancel are denied. A read that can send data out (it takes a URL, say) asks first too. It assumes the server is installed as meteoswiss. Review it before you use it.
Capability tags behind 2 rules
- mcp__meteoswiss__search untrusted-input
- mcp__meteoswiss__fetch untrusted-input
Pin
Keep the decision: fail CI when the tools change, follow every change, or show a badge.
Pin in CI
Fail a build when the tools you reviewed are not the tools the server serves today.
curl -s "https://radar.anlyon.com/api/v1/servers/io.github.eins78/meteoswiss-mcp/verify?hash=c9c553b5214426d11dc9fae6425e66471a8dd69116965dacae95a92633374ea4" | jq -e '.changed == false'Pinned hash c9c553b52144, from Nov 19, 2026, 15:17 UTC.
Watch
Get told when its tools change: a new tool, a new description, a new class.
https://radar.anlyon.com/servers/io.github.eins78/meteoswiss-mcp/changes.xmlAn Atom feed. Works in any feed reader or Slack's RSS app.
Badge
[](https://radar.anlyon.com/servers/io.github.eins78/meteoswiss-mcp)Source: MCP Registry · repository. Synced Oct 21, 2026, 18:33 UTC.
MeteoSwiss MCP Server: questions and answers
Answered from the scan above, not from the publisher's description.
Is the MeteoSwiss MCP Server safe?
- No scan can promise that. What its definitions show: 8 tools, all of which only read, and 2 findings from fixed checks. Read-only tools can still pass private data to a model.
Can the MeteoSwiss MCP Server delete data?
- No tool is classed as destructive: going by their definitions, none of them deletes, cancels or revokes anything.
Can the MeteoSwiss MCP Server do things that cannot be undone?
- No tool is classed as irreversible: none of them sends, pays, publishes or merges, going by their definitions.
What tools does the MeteoSwiss MCP Server have?
- 8 tools: 8 read. search, fetch, meteoswissLocalForecast, meteoswissWeatherSituation, meteoswissCurrentWeather, meteoswissStations, meteoswissPollenData and meteoswissClimateData.
Does the MeteoSwiss MCP Server need sign-in or OAuth?
- Its remote endpoint listed its tools to an anonymous client, without sign-in.
Does the MeteoSwiss MCP Server send data to outside services?
- None of its tools sends, posts or publishes, or takes a recipient, channel or URL.
Has the MeteoSwiss MCP Server changed its tools?
- Yes, once since Anlyon Radar started tracking it, most recently on Nov 19, 2026. Every change is on this page and in its Atom feed.