Skip to content

Emission Factors MCP server

io.github.rozetyp/emission-factorsrozetypstreamable-httpv1.8.0Scanned

Keyless US grid carbon + power cost by ZIP: eGRID Scope 2, Scope 1 fuels, site ranking, clean hours

11 tools: 2 change things and 9 only read.

Tools: 0 delete, 0 irreversible, 2 write, 9 read.
  • Reads private data · 0
  • Reads text others write · 0
  • Can send data out · 0
  • No findings

Tools listed without sign-in. Remote posture

With Anlyon

2 tools here change things. Govern them.

  • Anlyon lists the tools and adopts none.
  • Each tool you adopt gets approvals and receipts.
  • Your agent never holds the key.
Govern this server →

A tool your agent calls directly is not routed through Anlyon and is not governed by it. Anlyon Radar only lists and labels, and these labels are the same either way.

What the Emission Factors MCP server can do

The Emission Factors MCP server is published by the GitHub account rozetyp. It has 11 tools. It can create or change data (2 tools: calculate_emissions and calculate_fuel_emissions), but cannot delete data. 9 tools only read.

None of its tools reads private data, brings in text other people write, or sends data out.

None of the fixed checks matched anything in its tool definitions. That is not a safety guarantee.

Its remote endpoint lists its tools without sign-in.

Last scanned Nov 20, 2026, version 1.8.0.

Tools

Grouped by what each tool does, most consequential first. Open one for its reasons and full description; descriptions are the publisher's own words.

11 tools

Changes things 2Claude Code: ask
  • calculate_emissionsCalculate Scope 2 CO2e for a facility from its ZIP and kWh, using both GHG Protocol methods: location-based (eGRID subregion rate) and market-based (Green-e residual mix applied to…No findings

    Why it is in this group

    • Nothing in its name or description says what it does, so it is counted as a write.
    • The server marks it read-only (readOnlyHint: true), but an annotation never lowers a class.
    Description, as the server wrote it
    Calculate Scope 2 CO2e for a facility from its ZIP and kWh, using both GHG Protocol methods: location-based (eGRID subregion rate) and market-based (Green-e residual mix applied to kWh not covered by RECs, PPAs or green tariffs). Returns kg CO2e for each method with the factors used.

    Annotations the server declares

    • readOnlyHint: true
  • calculate_fuel_emissionsCalculate Scope 1 stationary-combustion emissions (CO2, CH4, N2O and CO2e) for fuels burned on site, using the GHG Emission Factors Hub 2026 (Cornerstone, successor to EPA's Hub; I…No findings

    Why it is in this group

    • Nothing in its name or description says what it does, so it is counted as a write.
    • The server marks it read-only (readOnlyHint: true), but an annotation never lowers a class.
    Description, as the server wrote it
    Calculate Scope 1 stationary-combustion emissions (CO2, CH4, N2O and CO2e) for fuels burned on site, using the GHG Emission Factors Hub 2026 (Cornerstone, successor to EPA's Hub; IPCC AR6 GWPs) by default, or EPA's 2025 edition (AR5) with edition=2025. Pass one or more items with fuel, quantity and unit, e.g. natural gas in therms/ccf/mcf/scf, propane/diesel/heating oil in gallons, coal in short tons. Biomass CO2 is reported separately (biogenic). Stationary sources only: for vehicle fuel the CO2 per gallon is the same, but CH4/N2O factors differ and are not included. Returns per-item and total CO2e. Pair with calculate_emissions for a facility's electricity (Scope 2).

    Annotations the server declares

    • readOnlyHint: true
Only reads 9Show 9 read-only tools
  • cleanest_hoursFind the cleanest (lowest grid carbon) contiguous window of N hours in the day to run a flexible load (batch jobs, EV charging, pumping, HVAC pre-cooling) at a US ZIP code or balan…No findings

    Why it is in this group

    • The description's first verb is "find": a word for reading.
    Description, as the server wrote it
    Find the cleanest (lowest grid carbon) contiguous window of N hours in the day to run a flexible load (batch jobs, EV charging, pumping, HVAC pre-cooling) at a US ZIP code or balancing authority. Based on the hour-of-day pattern of the last 7 days (168 hours) of EIA-930 data, in local time. Returns the cleanest and dirtiest windows, % saved vs the daily average, and all hours ranked; between limits the windows to given local hours (e.g. overnight). A scheduling guide from recent history, not a forecast.

    Annotations the server declares

    • readOnlyHint: true
  • compare_sitesCompare and rank 2-25 candidate US sites (ZIP codes) for a facility, data center or EV/flexible load on grid carbon and electricity cost in one call.No findings

    Why it is in this group

    • The name "compare_sites" says "compare": a word for reading.
    Description, as the server wrote it
    Compare and rank 2-25 candidate US sites (ZIP codes) for a facility, data center or EV/flexible load on grid carbon and electricity cost in one call. Per site: eGRID CO2e kg/kWh (location-based), Green-e residual mix (market-based), carbon-free %, $/kWh for the sector (the state's latest full-year average, EIA-861 annual; the ZIP's own 2023 utility average is shown as a reference), and the cleanest daily window from the 7-day hourly profile of its balancing authority, in the ZIP's local time. lowest_cost and best_combined are null unless every site has a rate. With annual_kwh, also annual tCO2e and cost. Returns competition ranks by carbon, cost and combined, gap percentages, and best_* = null with *_tied lists when sites tie.

    Annotations the server declares

    • readOnlyHint: true
  • electricity_rateGet the latest monthly average retail electricity rate ($/kWh and cents/kWh) for any US ZIP code, broken out by sector (residential, commercial, industrial, etc.).No findings

    Why it is in this group

    • The description's first verb is "get": a word for reading.
    Description, as the server wrote it
    Get the latest monthly average retail electricity rate ($/kWh and cents/kWh) for any US ZIP code, broken out by sector (residential, commercial, industrial, etc.). Data is state-level from EIA Form 861 - a ballpark, not utility- or ZIP-specific tariffs (use utility_tariff for those).

    Annotations the server declares

    • readOnlyHint: true
  • hourly_intensityGet hourly grid carbon intensity (kg CO2e per kWh) for any US ZIP code, derived from EIA-930 hourly fuel-mix data.No findings

    Why it is in this group

    • The description's first verb is "get": a word for reading.
    Description, as the server wrote it
    Get hourly grid carbon intensity (kg CO2e per kWh) for any US ZIP code, derived from EIA-930 hourly fuel-mix data. Data lags up to about a day (not real-time). Returns time series with per-hour fuel mix, total generation, and carbon intensity. For timing and analysis (demand response, load shifting, grid patterns), not inventory reporting: it uses fixed per-fuel combustion factors on in-BA generation (no imports), so its values don't match eGRID's annual factors. For live or forecast intensity, WattTime or Electricity Maps are better options.

    Annotations the server declares

    • readOnlyHint: true
  • lookup_batchLook up emission factors for up to 100 ZIP codes in one call (split longer lists).No findings

    Why it is in this group

    • The name "lookup_batch" says "lookup": a word for reading.
    Description, as the server wrote it
    Look up emission factors for up to 100 ZIP codes in one call (split longer lists). Returns one compact row per ZIP - subregion, CO2e kg/kWh (location-based), residual mix (market-based), carbon-free %, utility - unless full is true, which returns every field (about 2 KB per ZIP).

    Annotations the server declares

    • readOnlyHint: true
  • lookup_by_coordinatesLook up emission factors by latitude/longitude.No findings

    Why it is in this group

    • The name "lookup_by_coordinates" says "lookup": a word for reading.
    Description, as the server wrote it
    Look up emission factors by latitude/longitude. Uses US Census Geocoder to resolve to ZIP first, then returns the same data as lookup_emission_factor. Useful when you have a facility address or lat/lon but no ZIP.

    Annotations the server declares

    • readOnlyHint: true
  • lookup_emission_factorLook up EPA eGRID electricity emission factors for a US ZIP code.No findings

    Why it is in this group

    • The name "lookup_emission_factor" says "lookup": a word for reading.
    Description, as the server wrote it
    Look up EPA eGRID electricity emission factors for a US ZIP code. Returns CO2e (kg/kWh and lb/MWh), CO2, CH4, N2O, NOx, SO2, non-baseload rate, carbon-free %, generation mix (coal/gas/nuclear/hydro/wind/solar etc.), eGRID subregion code, the data year, and the Green-e residual mix rate (the market-based Scope 2 factor). For Scope 2 emissions from a kWh total, use calculate_emissions, which does the arithmetic for both methods.

    Annotations the server declares

    • readOnlyHint: true
  • plant_emissionsGet emissions from EPA Clean Air Markets Division (CAMD) for a specific US power plant or a state: fossil units over 25 MW reporting to the Acid Rain Program and CSAPR.No findings

    Why it is in this group

    • The description's first verb is "get": a word for reading.
    Description, as the server wrote it
    Get emissions from EPA Clean Air Markets Division (CAMD) for a specific US power plant or a state: fossil units over 25 MW reporting to the Acid Rain Program and CSAPR. Per facility returns total CO2 (short tons), gross generation (MWh), heat input (mmBtu), NOx and SO2 (lb), primary fuel type, operating hours, and derived emissions rate (kg CO2/MWh). CAMD publishes by quarter, so the default window is the last 7 days of the latest published quarter (latest_published_date in the response); later dates are not available yet. Default output is a per-facility summary from daily data; format=hourly returns unit-hour records for small windows. Use for plant-specific carbon accounting, state-level fossil emissions and "dirtiest plants in [state]" queries.

    Annotations the server declares

    • readOnlyHint: true
  • utility_tariffGet the actual utility-specific electricity rate (not state average) for a US ZIP code or named utility.No findings

    Why it is in this group

    • The description's first verb is "get": a word for reading.
    Description, as the server wrote it
    Get the actual utility-specific electricity rate (not state average) for a US ZIP code or named utility. Returns the current default tariff with effective rate ($/kWh), fixed monthly charge, tier count, TOU indicator, and effective date. Data source: OpenEI URDB (NREL-hosted). With a ZIP, matches the ZIP's utility by EIA ID. Returns currently-effective tariffs; when URDB has none flagged as default (common for Commercial/Industrial) it returns the most recent ones and says so in warnings, including when the newest available tariff has expired. Does not cover Texas retail electric providers (deregulated market) - use electricity_rate there.

    Annotations the server declares

    • readOnlyHint: true

This is not a safety rating, and no finding is not a safety guarantee. The groups and findings come from fixed checks of the tool definitions the server returned on the date shown, not from its code or what it does when called. How the checks work.

Exfil surface

Which tools read private data, which read text someone else can write, and which can send data out. One of each is a path a prompt injection can use.

No private-data, untrusted-input, outbound path in this server alone: no tool is tagged private-data or untrusted-input or outbound.

Reads private data0
Reads files, mail, messages, databases, secrets, calendars or repositories.
Reads text others write0
Brings in text someone else can write: web pages, inbound email, messages, issues and comments.
Can send data out0
Can carry data to people or systems: it sends, posts or publishes, or takes a recipient, channel or URL.

Other servers in the same agent add their own tools to these paths. Audit your whole setup to see them together.

Remote posture

What anyone on the internet sees at the remote endpoint: an anonymous initialize and tools/list, and the public OAuth metadata.

Tools listed without sign-in

Looked at Nov 20, 2026, 19:10 UTC, unchanged since Oct 22, 2026. No credentials were sent and no tool was called. What is looked at.

Reachable
yes
HTTP status of an anonymous initialize
200
tools/list served without credentials
yes
Tools that change things, listed without credentials
2
Protocol version
2025-06-18
WWW-Authenticate on 401
not observed
resource_metadata in WWW-Authenticate
not observed
RFC 9728 protected resource metadata
not observed
Authorization servers
not observed
Legacy HTTP+SSE transport
no
Dynamic client registration
not observed
Client ID metadata documents
not observed
  • WarnThe whole server

    The endpoint served tools/list without credentials, and the list has 2 tools that change things (2 write). Whether a call also works without credentials was not tested: tools are never called.

    Matched text

    https://emission-factors.com/mcp: tools/list returned 11 tools to an anonymous client, including calculate_emissions (write), calculate_fuel_emissions (write)

    What this check looks for

Findings

Matches of fixed checks, with the text they matched.

No check matched anything in these tool definitions. That is not a safety guarantee.

History

Changes to its tool definitions and to its remote endpoint, newest first.

No change seen yet. Its tools are rescanned every day, and a remote endpoint is looked at once a week.

Install

Pinned to version 1.8.0. Values in angle brackets are yours to fill in.

claude mcp add --transport http emission-factors https://emission-factors.com/mcp
claude mcp add --transport http emission-factors https://emission-factors.com/mcp

Run in a terminal.

Claude Code permissions

Allow the reads, ask before a change or a way out, deny the deletes. Paste into .claude/settings.json.

.claude/settings.json
{
  "permissions": {
    "allow": [
      "mcp__emission-factors__lookup_emission_factor",
      "mcp__emission-factors__lookup_by_coordinates",
      "mcp__emission-factors__lookup_batch",
      "mcp__emission-factors__hourly_intensity",
      "mcp__emission-factors__plant_emissions",
      "mcp__emission-factors__utility_tariff",
      "mcp__emission-factors__electricity_rate",
      "mcp__emission-factors__compare_sites",
      "mcp__emission-factors__cleanest_hours"
    ],
    "ask": [
      "mcp__emission-factors__calculate_emissions",
      "mcp__emission-factors__calculate_fuel_emissions"
    ],
    "deny": []
  }
}

Tools that only read are allowed, tools that change things ask first, tools that delete or cancel are denied. A read that can send data out (it takes a URL, say) asks first too. It assumes the server is installed as emission-factors. Review it before you use it.

Pin

Keep the decision: fail CI when the tools change, follow every change, or show a badge.

Pin in CI

Fail a build when the tools you reviewed are not the tools the server serves today.

curl -s "https://radar.anlyon.com/api/v1/servers/io.github.rozetyp/emission-factors/verify?hash=42eaba98ca7568cd30325f3690dbcb1bbc85bb7bec171f7f64fc1c2b14466cc3" | jq -e '.changed == false'

Pinned hash 42eaba98ca75, from Nov 20, 2026, 10:18 UTC.

Watch

Get told when its tools change: a new tool, a new description, a new class.

https://radar.anlyon.com/servers/io.github.rozetyp/emission-factors/changes.xml

An Atom feed. Works in any feed reader or Slack's RSS app.

Badge

Anlyon Radar badge for io.github.rozetyp/emission-factors
[![Anlyon Radar](https://radar.anlyon.com/badge/io.github.rozetyp/emission-factors.svg)](https://radar.anlyon.com/servers/io.github.rozetyp/emission-factors)

Source: MCP Registry · repository. Synced Oct 21, 2026, 18:46 UTC.

Emission Factors MCP server: questions and answers

Answered from the scan above, not from the publisher's description.

Is the Emission Factors MCP server safe?

No scan can promise that. What its definitions show: 11 tools, 2 of which can change, send or delete something, and 0 findings from fixed checks. Allow the reads, ask before each change, and deny the deletes; the permissions block on this page does that.

Can the Emission Factors MCP server delete data?

No tool is classed as destructive: going by their definitions, none of them deletes, cancels or revokes anything.

Can the Emission Factors MCP server do things that cannot be undone?

No tool is classed as irreversible: none of them sends, pays, publishes or merges, going by their definitions.

What tools does the Emission Factors MCP server have?

11 tools: 2 write, 9 read. calculate_emissions, calculate_fuel_emissions, lookup_emission_factor, lookup_by_coordinates, lookup_batch, hourly_intensity, plant_emissions, utility_tariff and 3 more.

Does the Emission Factors MCP server need sign-in or OAuth?

Its remote endpoint listed its tools to an anonymous client, without sign-in.

Does the Emission Factors MCP server send data to outside services?

None of its tools sends, posts or publishes, or takes a recipient, channel or URL.

Has the Emission Factors MCP server changed its tools?

Not since Anlyon Radar started tracking it. Last scanned Nov 20, 2026.