Gwinnett Index MCP server
net.gwindex/gwinnett-indexgwindex.netstreamable-httpv0.1.0Scanned
Gwinnett County, GA zoning and land use. Resolves an address to its governing jurisdiction.
5 tools: 5 only read.
- Reads private data · 1
- Reads text others write · 0
- Can send data out · 0
- No findings
Tools listed without sign-in. Remote posture
With Anlyon
Decide which of this server's tools your agent can use.
- Anlyon lists the tools and adopts none.
- Each tool you adopt gets approvals and receipts.
- Your agent never holds the key.
A tool your agent calls directly is not routed through Anlyon and is not governed by it. Anlyon Radar only lists and labels, and these labels are the same either way.
What the Gwinnett Index MCP server can do
The Gwinnett Index MCP server is published by gwindex.net, a domain the MCP Registry verified. It has 5 tools. Every one of them only reads: going by their definitions, none of them creates, changes, sends or deletes anything.
1 tool reads private data (get_code_section).
None of the fixed checks matched anything in its tool definitions. That is not a safety guarantee.
Its remote endpoint lists its tools without sign-in.
Last scanned Nov 18, 2026, version 0.1.0.
Tools
Grouped by what each tool does, most consequential first. Open one for its reasons and full description; descriptions are the publisher's own words.
5 tools
Only reads 5Show 5 read-only tools
get_caseFull record for a case number, including staff recommendation, Planning Commission recommendation, decision, parcels and a deep link to the source record.No findings
Why it is in this group
- The name "get_case" says "get": a word for reading.
Description, as the server wrote it Full record for a case number, including staff recommendation, Planning Commission recommendation, decision, parcels and a deep link to the source record.
get_code_sectionOrdinance text or a dimensional-standards table by citation, with its adoption and amendment dates.Reads private dataNo findings
Why it is in this group
- The name "get_code_section" says "get": a word for reading.
What it can reach
- private-dataThe description's first sentence says "table": it reads databases.
Description, as the server wrote it Ordinance text or a dimensional-standards table by citation, with its adoption and amendment dates. Accepts "402.03", "§ 402.03", "Duluth UDC § 402.03" or "Table 2-B". Tables that have not been verified against the rendered source page say so in the response.
list_jurisdictionsAll 19 jurisdictions indexed: Gwinnett County as a container, unincorporated Gwinnett as a jurisdiction in its own right, and the 17 municipalities — with their codes and boundary …No findings
Why it is in this group
- The name "list_jurisdictions" says "list": a word for reading.
Description, as the server wrote it All 19 jurisdictions indexed: Gwinnett County as a container, unincorporated Gwinnett as a jurisdiction in its own right, and the 17 municipalities — with their codes and boundary sources.
resolve_jurisdictionALWAYS CALL THIS FIRST for any Gwinnett County address or parcel.No findings
Why it is in this group
- The name "resolve_jurisdiction" says "resolve": a word for reading.
Description, as the server wrote it ALWAYS CALL THIS FIRST for any Gwinnett County address or parcel. Returns which government actually regulates the land — one of 17 cities, or unincorporated Gwinnett County (67.3% of the county) — with its code citation, a confidence band and the distance to the nearest jurisdiction boundary. A mailing address is NOT the jurisdiction: most "Duluth, GA" addresses are not in the City of Duluth.
search_casesSearch 11,848 zoning and land-use cases (1970–2026) by applicant, use, address, case number, type, year range or zoning district.No findings
Why it is in this group
- The name "search_cases" says "search": a word for reading.
Description, as the server wrote it Search 11,848 zoning and land-use cases (1970–2026) by applicant, use, address, case number, type, year range or zoning district. County records cover UNINCORPORATED Gwinnett only.
This is not a safety rating, and no finding is not a safety guarantee. The groups and findings come from fixed checks of the tool definitions the server returned on the date shown, not from its code or what it does when called. How the checks work.
Exfil surface
Which tools read private data, which read text someone else can write, and which can send data out. One of each is a path a prompt injection can use.
No private-data, untrusted-input, outbound path in this server alone: no tool is tagged untrusted-input or outbound.
- Reads private data1
- Reads files, mail, messages, databases, secrets, calendars or repositories.
- Reads text others write0
- Brings in text someone else can write: web pages, inbound email, messages, issues and comments.
- Can send data out0
- Can carry data to people or systems: it sends, posts or publishes, or takes a recipient, channel or URL.
Other servers in the same agent add their own tools to these paths. Audit your whole setup to see them together.
Remote posture
What anyone on the internet sees at the remote endpoint: an anonymous initialize and tools/list, and the public OAuth metadata.
Looked at Nov 20, 2026, 19:16 UTC, unchanged since Oct 22, 2026. No credentials were sent and no tool was called. What is looked at.
- Reachable
- yes
- HTTP status of an anonymous initialize
- 200
- tools/list served without credentials
- yes
- Tools that change things, listed without credentials
- 0
- Protocol version
- 2025-06-18
- WWW-Authenticate on 401
- not observed
- resource_metadata in WWW-Authenticate
- not observed
- RFC 9728 protected resource metadata
- not observed
- Authorization servers
- not observed
- Legacy HTTP+SSE transport
- no
- Dynamic client registration
- not observed
- Client ID metadata documents
- not observed
Findings
Matches of fixed checks, with the text they matched.
No check matched anything in these tool definitions. That is not a safety guarantee.
History
Changes to its tool definitions and to its remote endpoint, newest first.
No change seen yet. Its tools are rescanned every day, and a remote endpoint is looked at once a week.
Install
Pinned to version 0.1.0. Values in angle brackets are yours to fill in.
claude mcp add --transport http gwinnett-index https://www.gwindex.net/mcpclaude mcp add --transport http gwinnett-index https://www.gwindex.net/mcpRun in a terminal.
Claude Code permissions
Allow the reads, ask before a change or a way out, deny the deletes. Paste into .claude/settings.json.
{
"permissions": {
"allow": [
"mcp__gwinnett-index__resolve_jurisdiction",
"mcp__gwinnett-index__search_cases",
"mcp__gwinnett-index__get_case",
"mcp__gwinnett-index__get_code_section",
"mcp__gwinnett-index__list_jurisdictions"
],
"ask": [],
"deny": []
}
}Tools that only read are allowed, tools that change things ask first, tools that delete or cancel are denied. A read that can send data out (it takes a URL, say) asks first too. It assumes the server is installed as gwinnett-index. Review it before you use it.
Capability tags behind 1 rule
- mcp__gwinnett-index__get_code_section private-data
Pin
Keep the decision: fail CI when the tools change, follow every change, or show a badge.
Pin in CI
Fail a build when the tools you reviewed are not the tools the server serves today.
curl -s "https://radar.anlyon.com/api/v1/servers/net.gwindex/gwinnett-index/verify?hash=a0e4f5040fd6314c01b6f08bd46ed840b462d7e731bae76ee437e41fd2169a4b" | jq -e '.changed == false'Pinned hash a0e4f5040fd6, from Nov 18, 2026, 00:18 UTC.
Watch
Get told when its tools change: a new tool, a new description, a new class.
https://radar.anlyon.com/servers/net.gwindex/gwinnett-index/changes.xmlAn Atom feed. Works in any feed reader or Slack's RSS app.
Badge
[](https://radar.anlyon.com/servers/net.gwindex/gwinnett-index)Source: MCP Registry · repository. Synced Oct 21, 2026, 18:53 UTC.
Gwinnett Index MCP server: questions and answers
Answered from the scan above, not from the publisher's description.
Is the Gwinnett Index MCP server safe?
- No scan can promise that. What its definitions show: 5 tools, all of which only read, and 0 findings from fixed checks. Read-only tools can still pass private data to a model.
Can the Gwinnett Index MCP server delete data?
- No tool is classed as destructive: going by their definitions, none of them deletes, cancels or revokes anything.
Can the Gwinnett Index MCP server do things that cannot be undone?
- No tool is classed as irreversible: none of them sends, pays, publishes or merges, going by their definitions.
What tools does the Gwinnett Index MCP server have?
- 5 tools: 5 read. resolve_jurisdiction, search_cases, get_case, get_code_section and list_jurisdictions.
Does the Gwinnett Index MCP server need sign-in or OAuth?
- Its remote endpoint listed its tools to an anonymous client, without sign-in.
Does the Gwinnett Index MCP server send data to outside services?
- None of its tools sends, posts or publishes, or takes a recipient, channel or URL.
Has the Gwinnett Index MCP server changed its tools?
- Not since Anlyon Radar started tracking it. Last scanned Nov 18, 2026.